Re: [PATCH v2] Bluetooth: Properly disable remote wakeup for MT7922/MT7925 on Ryzen platform

[Rafael Passos]

Hi again,

On Mon Jul 6, 2026 at 4:39 PM -03, Rong Zhang wrote:
> Hi Rafael,
>
> Hmm, interesting. My speculation is that it doesn't matter which options are changed, but some changed options cause the BIOS to reinitialize something. Does resetting the BIOS settings to default help?

I was unable to trigger the same issue again. It has been working fine
(even when running without your patch). I believe the reset with bios
config changes fixed it for good.


> Could you provide more details about your device's USB and PCI topology? Does the NIC's USB connect to one of the USB root hubs of the SoC (i.e., CPU) or the chipset?

I believe its a hub connected to the chipset.

/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
    | ...
    |__ Port 008: Dev 004, If 0, Class=Wireless, Driver=btusb, 480M

In the block diagram on the manual [1], Key "E" Wifi is tied
to the AMD PROM21 CHipset.


> And I guess your device runs into the issue without any precursor? Once boot, try running the script below to capture more clues into dmesg, and wait for the issue to appear.
>
>     #!/bin/sh
>
>     ddcmd()
>     {
>         echo "$*" | sudo tee /proc/dynamic_debug/control;
>     }
>
>     ddcmd file drivers/usb/core/hub.c +p
>     ddcmd file drivers/usb/core/driver.c +p
>     ddcmd func handle_tx_event +p

Thanks for the script! I'm learning a bit with it!

> I would do the below experiments if I had a buggy device like that. Some extra hardware is required though.
>
> Connect another NIC (w/ Bluetooth interface) to the same M.2 port after triggering the enumeration failure, and see if the enumeration failure persists.

It is integrated (soldered) to my motherboard.

[1] page 10 https://download.asrock.com/Manual/B850M%20Steel%20Legend%20WiFi.pdf

Thanks,
Rafael Passos