[PATCH 3/3] arm64: dts: imx95-15x15-frdm: fix duplicated can-phy node names

[haibo . chen]

From: Haibo Chen <haibo.chen@xxxxxxx>

Both the flexcan2 and flexcan5 CAN transceiver PHY nodes use the same
node name "can-phy", which results in a node name collision. Distinguish
them by using unit-less unique names "can-phy0" and "can-phy1".

These two CAN PHYs share their silent pin, this shared GPIO can be
handled by GPIO shared proxy.

Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
index 0f43e3be70589532763f65f1699f31dd361cc841..7ed9ff978432edeff4198f189247a154fc1016b5 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
@@ -56,7 +56,7 @@ dmic: dmic {
 		num-channels = <2>;
 	};
 
-	flexcan2_phy: can-phy {
+	flexcan2_phy: can-phy0 {
 		compatible = "nxp,tja1051";
 		#phy-cells = <0>;
 		max-bitrate = <5000000>;
@@ -67,7 +67,7 @@ flexcan2_phy: can-phy {
 		silent-gpios = <&pcal6524 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	flexcan5_phy: can-phy {
+	flexcan5_phy: can-phy1 {
 		compatible = "nxp,tja1051";
 		#phy-cells = <0>;
 		max-bitrate = <5000000>;

-- 
2.34.1