RE: [PATCH 3/3] arm64: dts: imx95-15x15-frdm: fix duplicated can-phy node names

[Bough Chen]

> -----Original Message-----
> From: Bough Chen (OSS) <haibo.chen@xxxxxxxxxxx>
> Sent: 2026年7月30日 12:33
> To: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>; Vincent Mailhol
> <mailhol@xxxxxxxxxx>; Vinod Koul <vkoul@xxxxxxxxxx>; Neil Armstrong
> <neil.armstrong@xxxxxxxxxx>; Catalin Marinas <catalin.marinas@xxxxxxx>;
> Will Deacon <will@xxxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Krzysztof
> Kozlowski <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>;
> Frank Li <frank.li@xxxxxxx>; Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>;
> Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>; Fabio Estevam
> <festevam@xxxxxxxxx>
> Cc: linux-can@xxxxxxxxxxxxxxx; linux-phy@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx; Bough Chen
> <haibo.chen@xxxxxxx>; Joseph Guo <qijian.guo@xxxxxxx>
> Subject: [PATCH 3/3] arm64: dts: imx95-15x15-frdm: fix duplicated can-phy
> node names
> 
> From: Haibo Chen <haibo.chen@xxxxxxx>
> 
> Both the flexcan2 and flexcan5 CAN transceiver PHY nodes use the same
> node name "can-phy", which results in a node name collision. Distinguish
> them by using unit-less unique names "can-phy0" and "can-phy1".
> 
> These two CAN PHYs share their silent pin, this shared GPIO can be handled
> by GPIO shared proxy.

Sorry, forget to add the fix tag:

Fixes: 9bdfeed989b1 ("arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board")


Regards
Haibo Chen
> 
> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
> b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
> index
> 0f43e3be70589532763f65f1699f31dd361cc841..7ed9ff978432edeff4198f1
> 89247a154fc1016b5 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
> @@ -56,7 +56,7 @@ dmic: dmic {
>  		num-channels = <2>;
>  	};
> 
> -	flexcan2_phy: can-phy {
> +	flexcan2_phy: can-phy0 {
>  		compatible = "nxp,tja1051";
>  		#phy-cells = <0>;
>  		max-bitrate = <5000000>;
> @@ -67,7 +67,7 @@ flexcan2_phy: can-phy {
>  		silent-gpios = <&pcal6524 7 GPIO_ACTIVE_HIGH>;
>  	};
> 
> -	flexcan5_phy: can-phy {
> +	flexcan5_phy: can-phy1 {
>  		compatible = "nxp,tja1051";
>  		#phy-cells = <0>;
>  		max-bitrate = <5000000>;
> 
> --
> 2.34.1