Re: [PATCH v2 09/15] pinctrl: qcom: Add Kuno pinctrl driver

From: Konrad Dybcio

Date: Mon Aug 17 2026 - 13:00:50 EST


On 8/17/26 3:42 PM, Hardeep Sharma wrote:
>
> On 8/17/2026 6:54 PM, Konrad Dybcio wrote:
>> On 8/14/26 9:31 AM, Hardeep Sharma wrote:
>>> Add the TLMM pinctrl driver for the Qualcomm Kuno platform, supporting
>>> 110 GPIOs and their pin multiplexing, pin configuration and gpiolib
>>> interface through the common pinctrl-msm driver.
>>>
>>> Signed-off-by: Hardeep Sharma <hardeep.sharma@xxxxxxxxxxxxxxxx>
>>> ---
>> [...]
>>
>>> +    [65] = PINGROUP(65, qup0_se1, qdss_cti_trig1, qdss_cti_trig1, NA, NA, NA, NA, NA, NA),
>>> +    [66] = PINGROUP(66, qup0_se1, qdss_cti_trig1, qdss_cti_trig1, NA, NA, NA, NA, NA, NA),
>> Function3 can't be selected because of repeating names
>>
>> In qdss_cti_trig1_groups, you have qdss_cti_trig1 specified twice.
>> Perhaps there was a longer name that got truncated?
>>
>> Konrad
>
> Thanks Konrad for review.
>
> It's a real qdss_cti_trig1 line - the in/out
> mirror partner of funcsel 2:
>
>    GPIO65: fsel2 = qdss_cti_trig1_in_mirb, fsel3 = qdss_cti_trig1_out_mire
>    GPIO66: fsel2 = qdss_cti_trig1_out_mirb, fsel3 = qdss_cti_trig1_in_mire
>
> Both map to the same name because the driver uses one coarse
> "qdss_cti_trig1" for the in/out mirror variants.

But these are physically separate functions, even if the mirror feature
makes them seemingly one and the same

> Listing the function on both funcsels is the normal sdx convention for
> these mirror pairs - the in-tree drivers do it, including the same pins
> on sdx65:
>
>    - sdx55 [16][17][22][23][54][55][94][95] → in pinctrl-sdx55.c, pins
> 16, 17, 22, 23, 54, 55, 94, 95 each repeat qdss_cti at two funcsels.
>    - sdx65 [65]/[66] → in pinctrl-sdx65.c, pins 65 and 66 do it —
>    - sdx75 [16][52][53][56][57][78][79] → in pinctrl-sdx75.c, those pins
> do it.
>
> Only funcsel 2
> is selectable from DT (first-match), which is expected and matches those
> drivers.

As you described it, you found a bug (FSEL3 is not selectable), please
fix it in all the instances you've mentioned.

Konrad