[PATCH v4 1/2] dmaengine: dw-edma: Enable Chan Separation via VSEC

[Devendra K Verma]

As per, 'Designware Cores PCI Express DM Controller - Reference
Manual', section 3.2.34.3, VSEC for DEVICE INFORMATION supports
the channel separation mechanisms. Basically, the HDMA IP allows
the user to configure the separation between DMA channel
registers and retrieve it via the VSEC capability mentioned
above.

HDMA IP supports the channel register space separation from
256B to 32KB. Default supported size is 256B.

Signed-off-by: Devendra K Verma <devverma@xxxxxxx>
---
Changes in v3:
   o Reverted the trivial changes / typos.

Changes in v2:
   o Replaced 'ch_sep_sz' with 'ch_space_sz' wherever
     applicable upon reviewer recommendation.
   o Dropped 1/3 patch of this series, after review,
     now the 2/3 is 1/2 of the current patch series.

Changes in v1:
   o Modified dw_edma_get_ch_sep_sz() as per review comment.
     The function now supports ch_sep_sz up to 32KB.
   o Updated to description to reflect the supported channel
     separation sizes.
---
 drivers/dma/dw-edma/dw-edma-pcie.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
index 791c46e8ae4c..f287879b2cb9 100644
--- a/drivers/dma/dw-edma/dw-edma-pcie.c
+++ b/drivers/dma/dw-edma/dw-edma-pcie.c
@@ -33,6 +33,8 @@
 #define DW_PCIE_XILINX_MDB_VSEC_ID		0x20
 #define DW_PCIE_XILINX_MDB_VSEC_DMA_BAR		GENMASK(10, 8)
 #define DW_PCIE_XILINX_MDB_VSEC_DMA_MAP		GENMASK(2, 0)
+/* AMD CPM6 (Xilinx) supported cap */
+#define DW_PCIE_XILINX_CPM6_VSEC_CH_SEP		GENMASK(18, 16)
 #define DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH	GENMASK(9, 0)
 #define DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH	GENMASK(25, 16)
 
@@ -73,6 +75,7 @@ struct dw_edma_pcie_data {
 	u16				wr_ch_cnt;
 	u16				rd_ch_cnt;
 	u64				devmem_phys_off;
+	u32				ch_space_sz;
 };
 
 static const struct dw_edma_pcie_data snps_edda_data = {
@@ -189,6 +192,13 @@ static int dw_edma_pcie_irq_vector(struct device *dev, unsigned int nr)
 	return pci_irq_vector(to_pci_dev(dev), nr);
 }
 
+static u32 dw_edma_get_ch_space_sz(u32 val)
+{
+	if (val > 0 && val <= 7)
+		return 256 << val;
+	return 256;
+}
+
 static u64 dw_edma_pcie_address(struct device *dev, phys_addr_t cpu_addr)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -279,6 +289,10 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
 	pdata->mf = map;
 	pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_BAR, val);
 
+	if (pdev->device == PCI_DEVICE_ID_XILINX_B00F)
+		pdata->ch_space_sz = dw_edma_get_ch_space_sz
+					(FIELD_GET(DW_PCIE_XILINX_CPM6_VSEC_CH_SEP, val));
+
 	pci_read_config_dword(pdev, vsec + 0xc, &val);
 	pdata->wr_ch_cnt = min(pdata->wr_ch_cnt,
 			       FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH, val));
-- 
2.43.0