Re: [PATCH v4 1/2] dmaengine: dw-edma: Enable Chan Separation via VSEC
From: Frank Li
Date: Wed Aug 19 2026 - 11:23:16 EST
On Wed, Aug 19, 2026 at 12:39:46PM +0530, Devendra K Verma wrote:
> As per, 'Designware Cores PCI Express DM Controller - Reference
> Manual', section 3.2.34.3, VSEC for DEVICE INFORMATION supports
> the channel separation mechanisms. Basically, the HDMA IP allows
> the user to configure the separation between DMA channel
> registers and retrieve it via the VSEC capability mentioned
> above.
>
> HDMA IP supports the channel register space separation from
> 256B to 32KB. Default supported size is 256B.
>
> Signed-off-by: Devendra K Verma <devverma@xxxxxxx>
> ---
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
> Changes in v3:
> o Reverted the trivial changes / typos.
>
> Changes in v2:
> o Replaced 'ch_sep_sz' with 'ch_space_sz' wherever
> applicable upon reviewer recommendation.
> o Dropped 1/3 patch of this series, after review,
> now the 2/3 is 1/2 of the current patch series.
>
> Changes in v1:
> o Modified dw_edma_get_ch_sep_sz() as per review comment.
> The function now supports ch_sep_sz up to 32KB.
> o Updated to description to reflect the supported channel
> separation sizes.
> ---
> drivers/dma/dw-edma/dw-edma-pcie.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
> index 791c46e8ae4c..f287879b2cb9 100644
> --- a/drivers/dma/dw-edma/dw-edma-pcie.c
> +++ b/drivers/dma/dw-edma/dw-edma-pcie.c
> @@ -33,6 +33,8 @@
> #define DW_PCIE_XILINX_MDB_VSEC_ID 0x20
> #define DW_PCIE_XILINX_MDB_VSEC_DMA_BAR GENMASK(10, 8)
> #define DW_PCIE_XILINX_MDB_VSEC_DMA_MAP GENMASK(2, 0)
> +/* AMD CPM6 (Xilinx) supported cap */
> +#define DW_PCIE_XILINX_CPM6_VSEC_CH_SEP GENMASK(18, 16)
> #define DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH GENMASK(9, 0)
> #define DW_PCIE_XILINX_MDB_VSEC_DMA_RD_CH GENMASK(25, 16)
>
> @@ -73,6 +75,7 @@ struct dw_edma_pcie_data {
> u16 wr_ch_cnt;
> u16 rd_ch_cnt;
> u64 devmem_phys_off;
> + u32 ch_space_sz;
> };
>
> static const struct dw_edma_pcie_data snps_edda_data = {
> @@ -189,6 +192,13 @@ static int dw_edma_pcie_irq_vector(struct device *dev, unsigned int nr)
> return pci_irq_vector(to_pci_dev(dev), nr);
> }
>
> +static u32 dw_edma_get_ch_space_sz(u32 val)
> +{
> + if (val > 0 && val <= 7)
> + return 256 << val;
> + return 256;
> +}
> +
> static u64 dw_edma_pcie_address(struct device *dev, phys_addr_t cpu_addr)
> {
> struct pci_dev *pdev = to_pci_dev(dev);
> @@ -279,6 +289,10 @@ static void dw_edma_pcie_get_xilinx_dma_data(struct pci_dev *pdev,
> pdata->mf = map;
> pdata->rg.bar = FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_BAR, val);
>
> + if (pdev->device == PCI_DEVICE_ID_XILINX_B00F)
> + pdata->ch_space_sz = dw_edma_get_ch_space_sz
> + (FIELD_GET(DW_PCIE_XILINX_CPM6_VSEC_CH_SEP, val));
> +
> pci_read_config_dword(pdev, vsec + 0xc, &val);
> pdata->wr_ch_cnt = min(pdata->wr_ch_cnt,
> FIELD_GET(DW_PCIE_XILINX_MDB_VSEC_DMA_WR_CH, val));
> --
> 2.43.0
>