Re: [PATCH 31/34] arm64: dts: qcom: sm8650: Move PCIe phy and GPIOs to root port node

[Neil Armstrong]

On 9/10/26 15:29, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys and phy-names from the controller to
> the existing pcieport0 and pcie1_port0, allowing board-level
> overrides. Move perst-gpios/wake-gpios from the controller overrides
> to the respective port nodes in the board files, renaming perst-gpios
> to reset-gpios to match the binding used in the root port context.
>
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts | 14 ++++++++------
>   arch/arm64/boot/dts/qcom/sm8650-hdk.dts              | 14 ++++++++------
>   arch/arm64/boot/dts/qcom/sm8650-mtp.dts              | 16 ++++++++++------
>   arch/arm64/boot/dts/qcom/sm8650-qrd.dts              |  6 +++---
>   arch/arm64/boot/dts/qcom/sm8650.dtsi                 | 10 ++++------
>   5 files changed, 33 insertions(+), 27 deletions(-)

<snip>


Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Thanks,
Neil