Re: [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder

[Zhentao Guo]

Hi Krzysztof,
> On 29/09/2026 04:59, Zhentao Guo wrote:
> > Hi Krzysztof,
> >
> > > On Thu, Sep 24, 2026 at 03:55:10PM +0800, Zhentao Guo wrote:
> > > > Add bindings for Amlogic hardware decoder accelerator.
> > > >
> > > > Signed-off-by: Zhentao Guo <zhentao.guo@xxxxxxxxxxx>
> > > > ---
> > > >    .../devicetree/bindings/media/amlogic,s4-vdec.yaml | 114 +++++++++++++++++++++
> > > >    1 file changed, 114 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
> > > > new file mode 100644
> > > > index 000000000000..751043c3d9cc
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
> > > > @@ -0,0 +1,114 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/media/amlogic,s4-vdec.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Amlogic Video Decode Accelerator
> > > > +
> > > > +maintainers:
> > > > +  - Zhentao Guo <zhentao.guo@xxxxxxxxxxx>
> > > > +
> > > > +description:
> > > > +  The Video Decoder Accelerator present on Amlogic SOCs.
> > > > +  It supports stateless h264 decoding.
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    const: amlogic,s4-vdec
> > > > +
> > > > +  reg:
> > > > +    minItems: 2
> > > What is happening here? Previous version was different.
> > maxItems: 2 implies that a single items is also allowed,but the hardware actually requires at least two register regions (dos
> Since when?
It should have been minItems:2 ever since v1,I must admit that this is a 
long-standing mistake.
> > and dmc) to work, so minItems:2 makes sense here.
> >
> > The same applies to |power-domain| and |interrupts| below. At least 2
> > power-domains to make the hardware work, and at least 2 interrupts
> > needed for the two sub-cores.
>
> Best regards,
> Krzysztof

Best regards,

Zhentao