Re: [PATCH v4 7/7] riscv: dts: eswin: add watchdog support

[Samuel Holland]

Hi Pinkesh,

On 2026-08-14 2:00 AM, Pinkesh Vaghela wrote:
> From: Pritesh Patel <pritesh.patel@xxxxxxxxxxxxxx>
> 
> Add watchdog node for ESWIN EIC7700 SoC and enable them for HiFive
> Premier P550 board
> 
> Signed-off-by: Pritesh Patel <pritesh.patel@xxxxxxxxxxxxxx>
> Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@xxxxxxxxxxxxxx>
> ---
>  .../dts/eswin/eic7700-hifive-premier-p550.dts | 16 ++++++++
>  arch/riscv/boot/dts/eswin/eic7700.dtsi        | 40 +++++++++++++++++++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
> index 5dddcf13fd25..103c3dab184f 100644
> --- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
> +++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
> @@ -207,3 +207,19 @@ &uart2 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&uart2_pins>;
>  };
> +
> +&wdt0 {
> +	status = "okay";
> +};
> +
> +&wdt1 {
> +	status = "okay";
> +};
> +
> +&wdt2 {
> +	status = "okay";
> +};
> +
> +&wdt3 {
> +	status = "okay";
> +};

The watchdog timers have no dependency outside the SoC, so they can be enabled
by default (omit the status property). There is no need to separately enable
them for each board.

Regards,
Samuel

> diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> index c13432d14504..f873e9eeb929 100644
> --- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
> +++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> @@ -265,6 +265,46 @@ syscon: syscon@50440000 {
>  			};
>  		};
>  
> +		wdt0: watchdog@50800000 {
> +			compatible = "snps,dw-wdt";
> +			reg = <0x0 0x50800000 0x0 0x4000>;
> +			interrupts = <87>;
> +			clocks = <&clk EIC7700_CLK_GATE_LSP_WDT0_PCLK>;
> +			clock-names = "tclk";
> +			resets = <&reset EIC7700_RESET_WDT0>;
> +			status = "disabled";
> +		};
> +
> +		wdt1: watchdog@50804000 {
> +			compatible = "snps,dw-wdt";
> +			reg = <0x0 0x50804000 0x0 0x4000>;
> +			interrupts = <88>;
> +			clocks = <&clk EIC7700_CLK_GATE_LSP_WDT1_PCLK>;
> +			clock-names = "tclk";
> +			resets = <&reset EIC7700_RESET_WDT1>;
> +			status = "disabled";
> +		};
> +
> +		wdt2: watchdog@50808000 {
> +			compatible = "snps,dw-wdt";
> +			reg = <0x0 0x50808000 0x0 0x4000>;
> +			interrupts = <89>;
> +			clocks = <&clk EIC7700_CLK_GATE_LSP_WDT2_PCLK>;
> +			clock-names = "tclk";
> +			resets = <&reset EIC7700_RESET_WDT2>;
> +			status = "disabled";
> +		};
> +
> +		wdt3: watchdog@5080c000 {
> +			compatible = "snps,dw-wdt";
> +			reg = <0x0 0x5080c000 0x0 0x4000>;
> +			interrupts = <90>;
> +			clocks = <&clk EIC7700_CLK_GATE_LSP_WDT3_PCLK>;
> +			clock-names = "tclk";
> +			resets = <&reset EIC7700_RESET_WDT3>;
> +			status = "disabled";
> +		};
> +
>  		uart0: serial@50900000 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0x0 0x50900000 0x0 0x10000>;