[PATCH v6 06/11] arm64: dts: qcom: ipq5210: Add ICE support to SDHCI

[Varadarajan Narayanan]

Describe the SDHCI ICE register region and clock, and enable CQE support
for the IPQ5210 SDHCI controller.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5210.dtsi | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
index 331589a9c1ff..bc9502328738 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
@@ -416,9 +416,11 @@ uart1: serial@1a84000 {
 		sdhc: mmc@7804000 {
 			compatible = "qcom,ipq5210-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x0 0x07804000 0x0 0x1000>,
-			      <0x0 0x07805000 0x0 0x1000>;
+			      <0x0 0x07805000 0x0 0x1000>,
+			      <0x0 0x07808000 0x0 0x2000>;
 			reg-names = "hc",
-				    "cqhci";
+				    "cqhci",
+				    "ice";
 
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -427,11 +429,16 @@ sdhc: mmc@7804000 {
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface",
 				      "core",
-				      "xo";
+				      "xo",
+				      "ice";
 			non-removable;
+			assigned-clocks = <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			assigned-clock-rates = <300000000>;
+			supports-cqe;
 
 			status = "disabled";
 		};

-- 
2.34.1