Re: [PATCH net v3 0/6] amt: relay tunnel lifetime, validation and request-path hardening

[Omar Ramadan]

Thanks. 4/6-6/6 are carried over from v2, where the same question was
answered [1]. 1/6-3/6 are new in v3, so per patch:

1/6 (gc_wq re-arm use-after-free): theoretical. The Sashiko review of v2
pointed it out, and reading amt_update_handler() against
amt_tunnel_expire() and amt_dev_stop() confirms it. It needs a Membership
Update that has already found the tunnel under RCU to arrive while
amt_tunnel_expire() is freeing that tunnel. I have not triggered it, so
there is no trace to attach. After the patch the Update path no longer
touches gc_wq, so it cannot re-arm a tunnel that is being freed.

2/6 (Query or Data from 0.0.0.0): theoretical, found by inspection while
writing the IPv6 receive path in the net-next series [2]. Sashiko's review
of that series asked for the IPv4 part to be split out for net. While
remote_ip is still 0, "saddr != remote_ip" is false for a 0.0.0.0 source,
so a 0.0.0.0 -> 255.255.255.255 broadcast reaching the socket is accepted.
Not observed.

3/6 (IPv6 literal in an IPv4 attribute): triggered, while writing the IPv6
selftest. An iproute2 without the IPv6 attributes puts all 16 bytes of
"discovery 2001:db8:a::2" into IFLA_AMT_DISCOVERY_IP. On a stock kernel
the command exited 0 with no error or warning, and the device came up as
an IPv4 gateway with discovery address 32.1.13.184, the first four bytes.
There is no oops or trace: the symptom is the silently wrong address,
which the selftest's capability probe was fooled by and now checks for.
With the patch the attribute is refused with an extack.

Fix testing is in the cover letter: W=1 clean, a KASAN + lockdep +
PROVE_RCU boot running the amt selftests with no splat, and amt.sh with
max_tunnels 1.

[1] https://lore.kernel.org/netdev/20261009213749.2226283-1-omar@xxxxxxxxxxxxx/
[2] https://lore.kernel.org/netdev/20261009122426.551178-1-omar@xxxxxxxxxxxxx/