Re: [PATCH 1/6] arm64: dts: qcom: talos-lyra-evk: Add LT9611UXD HDMI bridge support

[Konrad Dybcio]

On 10/21/26 5:17 PM, anand.tiwari@xxxxxxxxxxxxxxxx wrote:
> From: Mohit Dsor <mohit.dsor@xxxxxxxxxxxxxxxx>
> 
> Add support for the Lontium LT9611UXD DSI-to-HDMI bridge, enabled by
> default on the Talos Lyra EVK base board DT, to provide HDMI output
> on the DSI0_B2B connector on the carrier card.

[...]

> +	vreg_disp_3p3: regulator-disp-3p3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_disp_3p3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&tlmm 3 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		pinctrl-0 = <&lcd_bias_en>;
> +		pinctrl-names = "default";
> +	};
> +
> +};

Stray \n above

Otherwise looks good

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad