Re: [PATCH 3/6] arm64: dts: qcom: talos-lyra-evk: Add RPi 7-inch DSI panel overlay

[Konrad Dybcio]

On 10/21/26 5:17 PM, anand.tiwari@xxxxxxxxxxxxxxxx wrote:
> From: Shashank Maurya <shashank.maurya@xxxxxxxxxxxxxxxx>
> 
> Add a DT overlay to enable Raspberry Pi 7-inch DSI panel connected
> to DSI 22pin on the carrier card.
> 
> DSI0 from SOC is routed through MUX which can be selected by DIP
> switch S1016.5 ON for enabling this 22pin connector.
> 
> Add the regulator and backlight controller at I2C2 address 0x45,
> Goodix GT911 touch controller, panel power and reset control, and
> a 2-lane DSI connection.
> 
> Disable the default HDMI bridge and connector in favour of the RPi
> DSI panel.
> 
> Signed-off-by: Shashank Maurya <shashank.maurya@xxxxxxxxxxxxxxxx>
> Signed-off-by: Anand Tiwari <anand.tiwari@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad