[PATCH 09/11] arm64: dts: qcom: sdm845-lg: Enable vbus support

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

On this device, vbus was setup and switched off by the charger driver.
Enable proper driver.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 84f0e1f0bcd32..d88bad1d07959 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -529,16 +529,23 @@ led@4 {
 
 		led@5 {
 			reg = <5>;
 			color = <LED_COLOR_ID_RED>;
 		};
 	};
 };
 
+&pmi8998_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1500000>;
+
+	status = "okay";
+};
+
 &pmi8998_wled {
 	qcom,current-limit-microamp = <20000>;
 	qcom,ovp-millivolt = <29600>;
 	qcom,switching-freq = <800>;
 	qcom,num-strings = <3>;
 	qcom,cabc;
 	status = "okay";
 };

-- 
2.55.0