[PATCH 04/11] arm64: dts: qcom: pmi8998: Add node for PMIC VBUS booster

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

Add the required DTS node for the USB VBUS output regulator, which is
available on PMI8998. This will provide the VBUS source to connected
peripherals.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index cd3f0790fd420..86640ea6e592c 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -24,16 +24,23 @@ pmi8998_charger: charger@1000 {
 
 			io-channels = <&pmi8998_rradc 3>,
 				      <&pmi8998_rradc 4>;
 			io-channel-names = "usbin_i", "usbin_v";
 
 			status = "disabled";
 		};
 
+		pmi8998_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pmi8998-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+
+			status = "disabled";
+		};
+
 		pmi8998_gpios: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
 			gpio-ranges = <&pmi8998_gpios 0 0 14>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

-- 
2.55.0