Re: [PATCH 1/2] dt-bindings: mmc: sdhci-msm: Document bindings for Nord SDCC

From: Anjana Hari

Date: Fri Nov 06 2026 - 05:37:04 EST




On 11/4/2026 7:28 PM, Krzysztof Kozlowski wrote:
On Mon, Nov 02, 2026 at 07:33:41PM +0530, Anjana Hari wrote:
Add Device Tree binding for the Nord SDHCI variant of the Qualcomm
sdhci-msm controller, where platform resources are managed by firmware
through the SCMI power protocol rather than being directly accessible
to Linux.

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v7.1-rc7/source/Documentation/devicetree/bindings/submitting-patches.rst#L23

Acked, will address in the upcoming v2 patch.>>
Unlike existing sdhci-msm variants, this binding does not require
clock, interconnect, reset, or regulator properties. Instead, platform
resource control is abstracted behind two logical power domains:

- "power": controls the SDCC rail power state. The kernel requests
power-on and power-off transitions via the runtime PM framework;
these are forwarded to firmware as SCMI power-state messages.

- "perf": exposes the supported clock frequencies as OPPs populated
dynamically by the SCMI perf domain driver at probe time via the
SCMI performance protocol. The driver selects operating points via
dev_pm_opp_find_freq_floor() and dev_pm_opp_set_opp().

Both domains must be listed under power-domains with their names
declared in power-domain-names.

The compatible string "qcom,nord-sdhci" selects this variant at probe
time and causes the driver to attach the two power domains via
dev_pm_domain_attach_list() with PD_FLAG_DEV_LINK_ON, ensuring correct
suspend/resume ordering between the SDCC controller and the firmware
power domain devices.

Do not describe driver. How is it exactly relevant here for the hardware
description?

Agreed, will be addressed.>>
Signed-off-by: Anjana Hari <anjana.hari@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/mmc/qcom,nord-sdhci.yaml | 89 ++++++++++++++++++++++
1 file changed, 89 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/qcom,nord-sdhci.yaml b/Documentation/devicetree/bindings/mmc/qcom,nord-sdhci.yaml
new file mode 100644
index 000000000000..c512628617b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/qcom,nord-sdhci.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/qcom,nord-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Nord SDHCI Controller
+
+maintainers:
+ - Anjana Hari <anjana.hari@xxxxxxxxxxxxxxxx>
+
+description:
+ SDHCI (SD Host Controller Interface) present on Qualcomm Nord SoC.
+ Clock and power resources are managed by firmware through an SCMI
+ server, so no clock entries are required in the device tree node.
+
+properties:
+ compatible:
+ const: qcom,nord-sdhci
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: hc

Where is CQHCI?

+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: hc_irq
+ - const: pwr_irq
+
+ iommus:
+ maxItems: 1
+ description: phandle to the apps SMMU node with SID mask.

Drop description

+
+ dma-coherent: true
+
+ power-domains:
+ maxItems: 2
+
+ power-domain-names:
+ items:
+ - const: power
+ - const: perf

Best regards,
Krzysztof