[PATCH 5/8] dt-bindings: media: i2c: Add Samsung S5KGD1 image sensor

[Gaurav Suman via B4 Relay]

From: Gaurav Suman <gauravsuman007@xxxxxxxxx>

Add bindings for the Samsung S5KGD1 (ISOCELL GD1) 32MP quad-Bayer
sensor, used as the front camera of the LG G8x ThinQ.

This was written and tested with the help of an AI coding assistant
(Claude Opus 5.5, Anthropic); I reviewed the change and the results.

Signed-off-by: Gaurav Suman <gauravsuman007@xxxxxxxxx>
---
 .../bindings/media/i2c/samsung,s5kgd1.yaml         | 105 +++++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5kgd1.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5kgd1.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..4b01f1057afe70665bb445c8395a6deaabc8bd9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5kgd1.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5kgd1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5KGD1 Image Sensor
+
+description:
+  Samsung S5KGD1 (ISOCELL GD1) is a 32MP image sensor with a quad-Bayer
+  (tetracell) colour filter array, controlled over a serial camera control
+  bus. The driver supports the 2x2 binned 3264x2448 mode at 30 frames per
+  second, RAW10 over a 4-lane MIPI D-PHY interface.
+
+maintainers:
+  - Gaurav Suman <gauravsuman007@xxxxxxxxx>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5kgd1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: MCLK supply clock.
+    maxItems: 1
+
+  reset-gpios:
+    description: Active low GPIO connected to RESET pad of the sensor.
+    maxItems: 1
+
+  vdda-supply:
+    description: Analogue voltage supply, 2.8 volts.
+
+  vddd-supply:
+    description: Digital core voltage supply.
+
+  vddio-supply:
+    description: Digital I/O voltage supply, 1.8 volts.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@2d {
+              compatible = "samsung,s5kgd1";
+              reg = <0x2d>;
+              clocks = <&camera_mclk 0>;
+              assigned-clocks = <&camera_mclk 0>;
+              assigned-clock-rates = <19200000>;
+              reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+              vdda-supply = <&vreg_2p8>;
+              vddd-supply = <&vreg_1p05>;
+              vddio-supply = <&vreg_1p8>;
+              orientation = <0>;
+              rotation = <90>;
+
+              port {
+                  endpoint {
+                      data-lanes = <1 2 3 4>;
+                      link-frequencies = /bits/ 64 <380800000>;
+                      remote-endpoint = <&csiphy_ep>;
+                  };
+              };
+          };
+      };
+...

-- 
2.49.1