[PATCH v8 5/8] arm64: dts: qcom: sm8250: Add JPEG encoder node

[Atanas Filipov]

Add the JPEG encoder hardware node to the SM8250 device tree so the
qcom-jpeg V4L2 encoder driver can bind and operate on this platform.

Signed-off-by: Atanas Filipov <atanas.filipov@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 72 ++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index f975c2183269a..7e8447df40188 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4480,6 +4480,78 @@ cci1_i2c1: i2c-bus@1 {
 			};
 		};
 
+		jpeg_enc: jpeg-encoder@ac53000 {
+			compatible = "qcom,sm8250-jpeg-enc";
+			status = "disabled";
+
+			reg = <0x0 0x0ac53000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc TITAN_TOP_GDSC>,
+					<&rpmhpd RPMHPD_MX>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "titan_top", "mx", "mmcx";
+
+			clocks = <&camcc CAM_CC_JPEG_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK>;
+
+			clock-names = "core",
+				      "bus",
+				      "config",
+				      "cpas",
+				      "camnoc_axi";
+
+			interconnects = <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "camnoc";
+
+			iommus = <&apps_smmu 0x2040 0x400>;
+
+			operating-points-v2 = <&jpeg_opp_table>;
+
+			jpeg_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <262560>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-peak-kBps = <524760>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-peak-kBps = <978600>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					opp-peak-kBps = <1095600>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-peak-kBps = <1095600>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
 		camss: camss@ac6a000 {
 			compatible = "qcom,sm8250-camss";
 			status = "disabled";
-- 
2.34.1