Re: [PATCH v8 7/8] arm64: dts: qcom: kodiak: Add JPEG encoder node
From: Dmitry Baryshkov
Date: Wed Nov 11 2026 - 08:33:18 EST
On Tue, Nov 10, 2026 at 06:39:08PM +0200, Atanas Filipov wrote:
> Add the JPEG encoder hardware node to the SC7280 (Kodiak) device tree
> so the qcom-jpeg V4L2 encoder driver can bind and operate on this
> platform. The node is disabled by default.
>
> Signed-off-by: Atanas Filipov <atanas.filipov@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/kodiak.dtsi | 67 ++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
> index 8c7523602d271..b46fbf5ebbeed 100644
> --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
> +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
> @@ -5164,6 +5164,73 @@ cci1_i2c1: i2c-bus@1 {
> };
> };
>
> + jpeg_enc: jpeg-encoder@ac4e000 {
> + compatible = "qcom,sc7280-jpeg-enc";
> + status = "disabled";
Same comment. Enable it by default.
> +
> + reg = <0x0 0x0ac4e000 0x0 0x1000>;
> +
> + interrupts = <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>;
> +
> + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>,
> + <&rpmhpd SC7280_CX>;
> + power-domain-names = "titan_top", "cx";
The same, drop cx. Also the PLLs on Kodiak are clocked by MX domain, so
MX should be listed here (and used to cast required votes on the MX
rail).
--
With best wishes
Dmitry