Re: [PATCH v16 10/16] pmdomain: rockchip: cycle an optional power-domain reset on power-on

From: Jiaxing Hu

Date: Thu Nov 12 2026 - 02:38:56 EST


Hi Finley,

Thanks for the feedback. I agree with all three points.

Some background on where the reset came from: we added it in June while
debugging the IOMMU, but found the same day that it did not actually help.
The real problem turned out to be that the IOMMU was missing the CBUF
clocks, which is what later went into mainline as 841363ebb508.

We had in fact already removed the reset in a debug patch at the time, but
when the series was put together later that step was missed and did not
go out with it.

I went back over the commit message, and both claims in it, that the first
access hangs and that the vendor kernel also cycles this reset, are not
accurate. There was no actual test showing a hang on the first access, and
I have checked that the vendor kernel has no such reset at all.

I also retested on the current code: without the reset, with the power
domain clocks back to two, and with no delay on NPU0/NPU1, both a warm
reboot and a cold power-on are fine, 30 runs each.

The VOP delay makes no visible difference on this board, so I will add it
as you suggest.

Thanks again, these were worth sorting out properly.

Jiaxing