[PATCH v5 4/4] arm64: dts: qcom: shikra-iqs: add M.2 Wi-Fi and Bluetooth overlay
From: Linghui Wu
Date: Thu Nov 12 2026 - 04:32:04 EST
Add an overlay for M.2 Key-E Wi-Fi and Bluetooth modules on the
Qualcomm Shikra IQS EVK.
The Shikra product design supports either the onboard Apache WCN3988
path or the M.2 HSP Cologne path at a time. The overlay describes the
board after hardware rework selects the M.2 path. Disable the inherited
onboard Wi-Fi and Bluetooth nodes when this overlay is selected.
Describe the PCIe and UART connections through the M.2 connector, the
3.3 V supply, the W_DISABLE signals and the PCIe reset signal.
The series has been validated on Shikra hardware.
Link: https://lore.kernel.org/r/20261102045815.2938940-1-linghui.wu@xxxxxxxxxxxxxxxx
Co-developed-by: Wei Deng <wei.deng@xxxxxxxxxxxxxxxx>
Signed-off-by: Wei Deng <wei.deng@xxxxxxxxxxxxxxxx>
Signed-off-by: Linghui Wu <linghui.wu@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../dts/qcom/shikra-iqs-evk-m2-wifi-bt.dtso | 122 ++++++++++++++++++
2 files changed, 124 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/shikra-iqs-evk-m2-wifi-bt.dtso
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 8329c06b60a3..037dbe8a39ce 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -410,10 +410,12 @@ dtb-$(CONFIG_ARCH_QCOM) += shikra-iqs-evk.dtb
shikra-cqm-evk-imx577-camera-dtbs := shikra-cqm-evk.dtb shikra-cqm-cqs-evk-imx577-camera.dtbo
shikra-cqs-evk-imx577-camera-dtbs := shikra-cqs-evk.dtb shikra-cqm-cqs-evk-imx577-camera.dtbo
shikra-iqs-evk-imx577-camera-dtbs := shikra-iqs-evk.dtb shikra-iqs-evk-imx577-camera.dtbo
+shikra-iqs-evk-m2-wifi-bt-dtbs := shikra-iqs-evk.dtb shikra-iqs-evk-m2-wifi-bt.dtbo
dtb-$(CONFIG_ARCH_QCOM) += shikra-cqm-evk-imx577-camera.dtb
dtb-$(CONFIG_ARCH_QCOM) += shikra-cqs-evk-imx577-camera.dtb
dtb-$(CONFIG_ARCH_QCOM) += shikra-iqs-evk-imx577-camera.dtb
+dtb-$(CONFIG_ARCH_QCOM) += shikra-iqs-evk-m2-wifi-bt.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4450-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk-m2-wifi-bt.dtso b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-m2-wifi-bt.dtso
new file mode 100644
index 000000000000..ef0f197a53f8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk-m2-wifi-bt.dtso
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026 Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ m2_keye_3p3: regulator-m2-keye-3p3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_3P3_KEYE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander3 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ wifi-bt-connector {
+ compatible = "pcie-m2-e-connector";
+
+ vpcie3v3-supply = <&m2_keye_3p3>;
+ w-disable1-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+ w-disable2-gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ m2_e_pcie_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&pcie_port0_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ m2_e_uart_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&uart8_ep>;
+ };
+ };
+ };
+ };
+};
+
+&{/wcn3988-pmu} {
+ status = "disabled";
+};
+
+&pcie {
+ iommu-map = <0x0 &apps_smmu 0x0800 0x0 0x1>,
+ <0x100 &apps_smmu 0x0801 0x0 0x1>;
+ pinctrl-0 = <&pcie_default_state>;
+ pinctrl-names = "default";
+ vddpe-3v3-supply = <&m2_keye_3p3>;
+ wake-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&pcie_phy {
+ vdda-phy-supply = <&pm8150_l12>;
+ vdda-pll-supply = <&pm8150_l9>;
+
+ status = "okay";
+};
+
+&pcie_port0 {
+ compatible = "pciclass,0604";
+ reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
+
+ port {
+ pcie_port0_ep: endpoint {
+ remote-endpoint = <&m2_e_pcie_ep>;
+ };
+ };
+};
+
+&uart8 {
+ bluetooth {
+ status = "disabled";
+ };
+
+ port {
+ uart8_ep: endpoint {
+ remote-endpoint = <&m2_e_uart_ep>;
+ };
+ };
+};
+
+&tlmm {
+ pcie_default_state: pcie-default-state {
+ clkreq-pins {
+ pins = "gpio117";
+ function = "pcie0_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio119";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&wifi {
+ status = "disabled";
+};
--
2.43.0