Re: [PATCH 2/3] hwmon: (w83791d) Fix incorrect struct cast in show_temp1() and store_temp1()
From: Guenter Roeck
Date: Sun Nov 15 2026 - 08:36:16 EST
On Sun, Nov 15, 2026 at 04:02:02PM +0800, Ziheng Wei wrote:
> On big-endian architectures, accessing the temp1_max and temp1_max_hyst
> sysfs attributes in the w83791d hardware monitoring driver uses a huge
> out-of-bounds index, because show_temp1() and store_temp1() downcast the
> attribute to the wrong struct.
>
> The driver defines the temp1_* attributes with SENSOR_ATTR_2(), which
> initializes them as struct sensor_device_attribute_2 (where the index is
> an 8-bit u8). The temp1_input attribute has index 0, temp1_max has
> index 1 and temp1_max_hyst has index 2. However, show_temp1() and
> store_temp1() downcast the attribute to struct sensor_device_attribute
> (where the index is a 32-bit int) and use it to index data->temp1[].
>
> Because both structs start with struct device_attribute, container_of()
> resolves to the same base address, but the field widths differ. On
> big-endian architectures, reading the 32-bit int from the memory layout
> of the two u8 fields yields index << 24: 0x01000000 for temp1_max and
> 0x02000000 for temp1_max_hyst, instead of 1 and 2. data->temp1[] has
> only 3 elements, so the access runs off the end of the array by up to
> 32 MiB.
>
> Fix the type casts in show_temp1() and store_temp1().
>
> Confirmed on a big-endian s390x QEMU guest with the driver bound to an
> emulated chip: temp1_max and temp1_max_hyst read 0 instead of the
> register values. Not tested on real hardware.
>
> Fixes: 9873964d6eb2 ("[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Ziheng Wei <zihengw03@xxxxxxx>
Applied.
Thanks,
Guenter