Re: [PATCH] MIPS: ingenic: Work around stale L2 data after DMA on XBurst II

From: Olivier Louvignes

Date: Sun Nov 15 2026 - 12:01:47 EST


Hi Nikolaus, Hunter,

On Thu, Nov 12, 2026 at 11:24:40AM +0100, H. Nikolaus Schaller wrote:
> Maybe the individuals and teams working on the XBurst devices should coordinate somehow
> to avoid double work and potentially incompatible fragments?
>
> E.g. by describing which hardware is available, which topics/code patches are in the queue etc.

Good idea. On my side:

Hardware: a HiBy R1, an X1600E music player (480x800 RGB panel,
CS43131 DAC, AXP2101 PMIC, SPI-NAND, Wi-Fi on SDIO, Bluetooth on
UART0). It runs mainline from its own flash.

Posted and waiting: i2c v2, PWM v3, serial v3 (binding only), display
and panel v4, cs43130 TDM v3, the dma-jz4780 fix. AXP2101 v2 follows.

Not posted:
- CGU and the X1600 USB PHY: yours, as agreed. I will test them on
the R1 when they are out, including the 1 ms wait after POR
- MACH_X1600 and the R1's board and dts: I will rebase them on your
MIPS series and dtsi
- the X1600 TCU and watchdog (needs rework: the TCU is the X2000's)
- a driver for the X1600 SFC (SPI-NAND)
- MIPS kexec writing the new kernel back from the caches, and keeping
the jz4740 MMC clock running on an SDIO host

All of it is in kernel/patches of
https://github.com/mgcrea/hiby-r1-linux, on top of v7.3.

Thanks,
Olivier