Re: [PATCH v5 08/12] arm64: dts: qcom: sm6350-lena: Enable PMK8350

From: Luca Weiss

Date: Tue Nov 17 2026 - 07:02:24 EST


On Mon Nov 16, 2026 at 11:50 PM CET, erebion wrote:
> Configure and enable nodes for PMK8350 on the Xperia 10 III.
>
> The phone has two PMICs which have a PON block, disable the PMK8350
> PON and keep the PM6350 PON, as only one should be enabled.
>

Reviewed-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>

> Signed-off-by: erebion <erebion@xxxxxxxxxx>
> ---
> .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 34 ++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> index 697e1cfae72e0..50a235d6fb6df 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -8,7 +8,11 @@
> #define PM7250B_SID 2
> #define PM7250B_SID1 3
>
> +/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
> +#define PMK8350_SID 6
> +
> #include <dt-bindings/firmware/qcom,scm.h>
> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> @@ -16,6 +20,7 @@
> #include "pm6150l.dtsi"
> #include "pm6350.dtsi"
> #include "pm7250b.dtsi"
> +#include "pmk8350.dtsi"
>
> / {
> model = "Sony Xperia 10 III";
> @@ -420,6 +425,35 @@ &pm7250b_vbus {
> status = "okay";
> };
>
> +&pmk8350_adc_tm {
> + status = "okay";
> +
> + xo-therm@0 {
> + reg = <0>;
> + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
> + qcom,hw-settle-time-us = <200>;
> + qcom,ratiometric;
> + };
> +};
> +
> +&pmk8350_pon {
> + status = "disabled";
> +};
> +
> +&pmk8350_rtc {
> + status = "okay";
> +};
> +
> +&pmk8350_vadc {
> + channel@644 {
> + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
> + label = "xo_therm";
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + };
> +};
> +
> &qupv3_id_0 {
> status = "okay";
> };