[PATCH 1/2] usb: musb: sunxi: Assert reset before deasserting on init

From: Roadbobek via B4 Relay

Date: Tue Nov 17 2026 - 08:00:33 EST


From: Roadbobek <admin@xxxxxxxxxxxxx>

When a bootloader such as U-Boot (for example with
CONFIG_USB_MUSB_HOST=y) initializes MUSB and boots Linux
without stopping USB first, the controller reset line is
already deasserted at probe time.

In that case reset_control_deassert() in sunxi_musb_init()
is a no-op and stale MUSB register state persists across boot.
On Allwinner A33, MUSB stays wedged in a_wait_bcon with
DevCtl=0x99, Power=0xf0, and a frozen Frame counter even
across hot-unplug and replug.

Assert glue->rst briefly before deasserting it when
SUNXI_MUSB_FL_HAS_RESET is set so MUSB starts cleanly.
Tested on an Allwinner A33 Q8 tablet (Laser MID-786).

Signed-off-by: Roadbobek <admin@xxxxxxxxxxxxx>
---
drivers/usb/musb/sunxi.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index a17b1c150626..3d16049e53b5 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -9,6 +9,7 @@
*/

#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/extcon.h>
#include <linux/io.h>
@@ -239,6 +240,8 @@ static int sunxi_musb_init(struct musb *musb)
goto error_sram_release;

if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
+ reset_control_assert(glue->rst);
+ usleep_range(10, 20);
ret = reset_control_deassert(glue->rst);
if (ret)
goto error_clk_disable;

--
2.53.0