[PATCH 0/2] usb/phy: sunxi: Assert reset before deasserting on init

From: Roadbobek via B4 Relay

Date: Tue Nov 17 2026 - 08:00:50 EST


When a bootloader such as U-Boot (for example with
CONFIG_USB_MUSB_HOST=y) initializes USB host mode and boots Linux
without stopping USB first, both the MUSB controller and USB0 PHY
reset lines are already deasserted when Linux probes them.

Because reset_control_deassert() alone is a no-op on an already
deasserted reset line, stale hardware register state persists across
boot. On Allwinner A33, MUSB stays wedged in a_wait_bcon with
DevCtl=0x99, Power=0xf0, and a frozen Frame counter even across
hot-unplug and replug.

This two-patch series briefly asserts reset before deasserting it in
both drivers so USB starts cleanly regardless of prior bootloader state:

- Patch 1 asserts glue->rst in sunxi_musb_init().
- Patch 2 asserts phy->reset in sun4i_usb_phy_init().

Tested on an Allwinner A33 Q8 tablet (Laser MID-786).

Signed-off-by: Roadbobek <admin@xxxxxxxxxxxxx>
---
Roadbobek (2):
usb: musb: sunxi: Assert reset before deasserting on init
phy: sun4i-usb: Assert reset before deasserting in phy init

drivers/phy/allwinner/phy-sun4i-usb.c | 2 ++
drivers/usb/musb/sunxi.c | 3 +++
2 files changed, 5 insertions(+)
---
base-commit: 666539eecdf4db623f5e3c3e55cf9f2dfad24aa4
change-id: 20261117-usb-sunxi-reset-fix-d1a0001440a9

Best regards,
--
Roadbobek <admin@xxxxxxxxxxxxx>