[PATCH] pwm: Don't dereference the chip after put_device() in __pwm_put()

From: Suyuan Wang via B4 Relay

Date: Thu Nov 19 2026 - 05:56:22 EST


From: Suyuan Wang <stevewong@xxxxxxxxxxx>

__pwm_put() drops the chip reference the consumer took and then reads the
chip to drop the module reference:

put_device(&chip->dev);
module_put(chip->owner);

A consumer takes both references in pwm_device_request()
(try_module_get(chip->owner) and get_device(&chip->dev)). The chip's base
reference is released by pwmchip_put(), not by pwmchip_remove(), so a
consumer can still hold a pwm after the provider has removed and put the
chip. When that consumer finally calls pwm_put(), the put_device() here
drops the last reference, pwmchip_release() frees the chip, and
module_put(chip->owner) then reads the freed chip.

Read chip->owner into a local before put_device() and use that.

Found with a static analysis tool and checked by hand.

Fixes: 4c56b1434b81 ("pwm: Add a struct device to struct pwm_chip")
Cc: stable@xxxxxxxxxxxxxxx
Co-developed-by: Kaixuan Li <kaixuan.li@xxxxxxxxxx>
Signed-off-by: Kaixuan Li <kaixuan.li@xxxxxxxxxx>
Signed-off-by: Suyuan Wang <stevewong@xxxxxxxxxxx>
---
Compile tested on x86_64 (W=1 and sparse, no new warnings). I don't have
the hardware.
---
drivers/pwm/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 4c6d716e5fde..8988a7dbe5b1 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -2020,6 +2020,7 @@ EXPORT_SYMBOL_GPL(pwm_get);
static void __pwm_put(struct pwm_device *pwm)
{
struct pwm_chip *chip = pwm->chip;
+ struct module *owner = chip->owner;

/*
* Trigger a warning if a consumer called pwm_put() twice.
@@ -2038,7 +2039,7 @@ static void __pwm_put(struct pwm_device *pwm)

put_device(&chip->dev);

- module_put(chip->owner);
+ module_put(owner);
}

/**