[PATCH v3 0/2] PCI/ATS: Disable ATS when ACS TB is set upstream
From: Danny Gonzalez
Date: Thu Nov 19 2026 - 19:23:20 EST
This series disables ATS on endpoints when an upstream bridge has ACS
Translation Blocking (PCI_ACS_TB) enabled, preventing ACS Violations on
translated DMA requests.
Patch 1/2 stops pci_dev_reset_iommu_done() from re-evaluating
pci_ats_supported() and dev_has_iommu() independently from
pci_dev_reset_iommu_prepare(), tracking whether state needs to be
restored via a @restore output flag instead. It can be merged
independently.
Patch 2/2 updates pci_ats_supported() to walk upstream bridges and
return false if any bridge has PCI_ACS_TB set in PCI_ACS_CTRL.
Changes since v2:
- Add patch 1/2 to track IOMMU reset restore state between
pci_dev_reset_iommu_prepare() and pci_dev_reset_iommu_done()
- Move the upstream ACS TB check back into pci_ats_supported(),
dropping pci_ats_check_acs() and changes to pci-driver.c and pci.h
- Read PCI_ACS_CTRL directly and check the return value and
PCI_POSSIBLE_ERROR() so inaccessible bridges are not treated as
having PCI_ACS_TB set
- Remove the pci_warn_once() logging and helper function
Changes since v1 (v2, based on Sashiko review):
- Move the upstream ACS TB check from pci_ats_supported() into
pci_ats_check_acs() called after pci_enable_acs()
- Use pci_acs_enabled() instead of reading PCI_ACS_CTRL directly
Danny Gonzalez (2):
iommu: Track whether pci_dev_reset_iommu_done() needs to restore state
PCI/ATS: Disable ATS when ACS TB is set upstream
drivers/iommu/iommu.c | 14 ++++++++++----
drivers/pci/ats.c | 19 +++++++++++++++++++
drivers/pci/pci-acpi.c | 5 +++--
drivers/pci/pci.c | 25 +++++++++++++++----------
drivers/pci/quirks.c | 5 +++--
include/linux/iommu.h | 9 +++++----
6 files changed, 55 insertions(+), 22 deletions(-)
--
2.56.1.708.g77570a6a1d-goog