Re: [PATCH v4 0/2] Add support for SA8255P in the phy-qcom-snps-femto-v2 phy driver
From: Mattijs Korpershoek
Date: Fri Nov 20 2026 - 05:30:07 EST
On Thu, Nov 19, 2026 at 19:15, Vinod Koul <vkoul@xxxxxxxxxx> wrote:
> On 27-10-26, 14:00, Mattijs Korpershoek wrote:
>> The Qualcomm automotive SA8255p SoC abstracts resources such as resets,
>> clocks and regulators in firmware. The SCMI firmware exposes multiple
>> protocols to control such resources which are identified by protocol_id.
>>
>> For this USB phy, 2 SCMI protocols are exposed by the firmware:
>> * power domain management protocol (protocol_id=0x11)
>> * performance domain management protocol (protocol_id=0x13)
>>
>> The power domain has 2 indices: 'core' and 'transfer'.
>> * core controls the regulators, the clocks and the reset
>> * transfer only controls the clocks
>>
>> For example, to power on/off the PHY, we should use the 'core' domain.
>> To disable data transfer and keeping power enabled, we should use the
>> 'transfer' domain.
>
> Hey, this fails on phy/next for me, can you please rebase
Indeed, the IPQ9650 support that was recently merged causes
conflicts.
I will re-submit a rebased v5 shortly.
Thanks
Mattijs
>
> --
> ~Vinod