Re: [PATCH v2 3/3] iio: adc: rohm-bd79112: Support ROHM BD79111

From: Andy Shevchenko

Date: Fri Nov 20 2026 - 09:44:58 EST


On Fri, Nov 20, 2026 at 02:28:28PM +0200, Matti Vaittinen wrote:
>
> ROHM BD79111 is very similar to the BD79112. Both are ADC/GPIO devices,
> where pins can be configured to be either used as GPIO or ADC inputs.
> ADCs are 12-bit SAR ADCs and GPIOs support input/output but not being IRQ
> sources.
>
> The main difference is amount of channels/GPIOs. The BD79112 has 32 pins
> for this use, the BD79111 has 16. Furthermore, the BD79111 data-sheet
> promises 0.5 MSPS sample rate with maximum of 10 MHz SPI clock, whereas
> the BD79112 data-sheet mentioned 1MSPS rate with maximum of 20 MHz SPI
> clock.

...

> - Return -ENODATA instead of -ENODEV when SPI match data is not
> available.

I guess you were distracted by something, the error code is now introduced in
the very previous patch, fix it there.

...

> - tristate "Rohm BD79112 ADC driver"
> + tristate "ADC/GPIO Driver for ROHM BD79112 et al."

> - * ROHM ADC driver for BD79112 signal monitoring hub.
> + * ROHM ADC/GPIO driver for BD79112 and similar signal monitoring hubs.

Can this text be modified to be closer to the other two?
Something like:

* ADC/GPIO Driver for ROHM BD79112 and similar signal monitoring hubs.

> -MODULE_DESCRIPTION("Driver for ROHM BD79112 ADC/GPIO");
> +MODULE_DESCRIPTION("ADC/GPIO Driver for ROHM BD79112 et al.");

...

Otherwise LGTM,
Reviewed-by; Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>

--
With Best Regards,
Andy Shevchenko