ksyms.c X(*irq*)

Todd Fries (tfries@umr.edu)
Tue, 17 Oct 1995 18:47:01 +0000 (GMT)

ld -m elf_i386 -Ttext 0x100000 -e stext arch/i386/kernel/head.o init/main.o init/version.o \
arch/i386/kernel/kernel.o arch/i386/mm/mm.o kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o net/network.a \
fs/filesystems.a \
drivers/block/block.a drivers/char/char.a drivers/net/net.a arch/i386/math-emu/math.a \
/home/todd/src/linux/arch/i386/lib/lib.a /home/todd/src/linux/lib/lib.a /home/todd/src/linux/arch/i386/lib/lib.a -o vmlinux
kernel/kernel.o(.data+0x3848): undefined reference to `autoirq_setup'
kernel/kernel.o(.data+0x3850): undefined reference to `autoirq_report'
kernel/kernel.o(.data+0x3a38): undefined reference to `irq2dev_map'
make: *** [vmlinux] Error 1

So I commented those structures, which seem to only
be mentioned in ksyms.c, out...and it has compiled...
now to reboot! (yes, I had done make clean after
patching up from 1.3.34..)...

(my specific .config follows)

-- 
Todd Fries...tfries@umr.edu
http://www.cs.umr.edu/~tfries


#
# Automatically generated make config: don't edit
#
#
# General setup
#
CONFIG_MATH_EMULATION=y
CONFIG_BLK_DEV_FD=m
CONFIG_ST506=y
#
# Please see drivers/block/README.ide for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_XD is not set
CONFIG_NET=y
CONFIG_MAX_16M=y
# CONFIG_PCI is not set
CONFIG_SYSVIPC=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_M486 is not set
# CONFIG_SMP is not set
#
# Loadable module support
#
# CONFIG_MODVERSIONS is not set
#
# Networking options
#
CONFIG_INET=y
CONFIG_IP_FORWARD=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_FIREWALL=y
# CONFIG_IP_ACCT is not set
CONFIG_NET_IPIP=m
# CONFIG_IP_FIREWALL_VERBOSE is not set
CONFIG_IP_MASQUERADE=y
#
# (it is safe to leave these untouched)
#
CONFIG_INET_PCTCP=y
CONFIG_INET_RARP=m
# CONFIG_INET_SNARL is not set
# CONFIG_TCP_NAGLE_OFF is not set
# CONFIG_IP_NOSR is not set
CONFIG_SKB_LARGE=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Skipping SCSI configuration options...
#
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_PPP=m
#
# CCP compressors for PPP are only built as modules.
#
# CONFIG_SCC is not set
CONFIG_PLIP=m
CONFIG_EQUALIZER=m
# CONFIG_NET_ALPHA is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_ARCNET is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
CONFIG_CD_NO_IDESCSI=y
# CONFIG_CDU31A is not set
CONFIG_MCD=m
CONFIG_MCDX=m
# CONFIG_SBPCD is not set
# CONFIG_AZTCD is not set
# CONFIG_CDU535 is not set
# CONFIG_GSCD is not set
# CONFIG_CM206 is not set
# CONFIG_OPTCD is not set
# CONFIG_SJCD is not set
#
# Filesystems
#
CONFIG_MINIX_FS=m
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
CONFIG_XIA_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_PROC_FS=y
CONFIG_NFS_FS=m
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_SMB_FS=m
#
# character devices
#
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_PRINTER is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_PSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Kernel hacking
#
# CONFIG_PROFILE is not set