Re: 3C509 and tulip

Anthony Barbachan (barbacha@trill.cis.fordham.edu)
Wed, 8 Jul 1998 21:57:07 -0400

try, at the lilo prompt: 3c509=0x300 or whatever your io address is. By the
way newer 3c509s can be placed in PNP mode. If yours is in PNP mode then
you will have to put it back in standard mode first or else it will not be
reconized.

-----Original Message-----
From: James Rich <james.rich@m.cc.utah.edu>
To: linux-kernel@vger.rutgers.edu <linux-kernel@vger.rutgers.edu>
Date: Wednesday, July 08, 1998 12:35 AM
Subject: 3C509 and tulip

>I am trying to put together a system which uses both a 3c509 and a
>netgear (tulip) ethernet cards. However, on boot up only the tulip card
>is found. I really need the second card as this is a server between 3
>LANs (the third is on token-ring, works great). Any ideas on what I can
>do to get the 3c509 recognized? This is with both cards compiled into
>the kernel (not as modules).
>
>james.rich@m.cc.utah.edu
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.rutgers.edu
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu