> www.wdc.com/quality/err-rec.html
>
> See if it does or doesn't here.
>
> If it does pass the requirements, then please send me a copy of the
> firmware revisions that hdparm reports, and ditto if they fail.
I have been having the same problem with a AC32500. My hdparm -i is as follows:
--
Model=WDC AC32500H, FwRev=24.09P07, SerialNo=WD-WT334
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=4960/16/63, TrkSize=57600, SectSize=600, ECCbytes=22
BuffType=3(DualPortCache), BuffSize=128kB, MaxMultSect=16, MultSect=off
DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=0(slow)
CurCHS=620/128/63, CurSects=4999680, LBA=yes, LBAsects=4999680
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2
IORDY=on/off, tPIO={min:160,w/IORDY:120}, PIO modes: mode3 mode4
--
(DMA is listed as "yes" because I turned it on using hdparm after determining
that it didn't need the firmware upgrade, as reported by the WD upgrade program
you referenced.) I guess this is one you can add to your "good" list.
Thanks,
Kyle
--
Kyle R. Rose "They can try to bind our arms,
Laboratory for Computer Science but they cannot chain our
MIT NE43-309, 617-253-5883 minds or hearts..."
http://web.mit.edu/krr/www/ Stratovarius
krose@theory.lcs.mit.edu Forever Free
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/