Re: OpenOffice crashes due to incorrect access permissions on /dev/dri/card*

[Alessandro Suardi]

On Sat, 29 Jan 2005 13:02:51 +0000, Richard Hughes <ee21rh@xxxxxxxxxxxx> wrote:
> On Sat, 29 Jan 2005 12:49:16 +0000, Richard Hughes wrote:
> > Note, that strace glxgears gives exactly the same output, going from 0 to
> > 14 and then seg-faulting, so it's *not just a oo problem*.
> 
> I know it's bad to answer your own post, but here goes.
> 
> I changed my /etc/udev/permissions.d/50-udev.permissions config to read:
> 
> dri/*:root:root:0666
> 
> changing it from
> 
> dri/*:root:root:0660
> 
> And oowriter and glxgears work from bootup. Shall I file a bug with udev?

Interesting. On my FC2 (without udev) under 2.6.11-rc2-bk5
both programs work fine with /dev/dri/card0 in its default
 permissions - 666 (obviously).

However, if I manually chmod /dev/dri/card0 to 660 I don't
 get a SEGV, but rather

[asuardi@incident asuardi]$ glxgears
libGL error: failed to open DRM: Operation not permitted
libGL error: reverting to (slow) indirect rendering
711 frames in 5.0 seconds = 142.200 FPS
X connection to :0.0 broken (explicit kill or server shutdown).
[asuardi@incident asuardi]$ ooffice
libGL error: failed to open DRM: Operation not permitted
libGL error: reverting to (slow) indirect rendering

And both still work.

Relevant strace portion from glxgears says

read(3, "\1\355\21\0\3\0\0\0\0\200\204\370\0\0\0\0\t\0\0\0\33\0"..., 32) = 32
readv(3, [{"PCI:1:0:0", 9}, {"\0\0\0", 3}], 2) = 12
geteuid32()                             = 41
stat64("/dev/dri", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/dev/dri/card0", {st_mode=S_IFCHR|0660, st_rdev=makedev(226,
0), ...}) = 0
open("/dev/dri/card0", O_RDWR)          = -1 EACCES (Permission denied)
open("/dev/dri/card0", O_RDWR)          = -1 EACCES (Permission denied)
unlink("/dev/dri/card0")                = -1 EACCES (Permission denied)
geteuid32()                             = 41
stat64("/dev/dri", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/dev/dri/card1", 0xbffff0dc)    = -1 ENOENT (No such file or directory)
...
stat64("/dev/dri", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat64("/dev/dri/card14", 0xbffff0dc)   = -1 ENOENT (No such file or directory)
write(2, "libGL error: failed to open DRM:"..., 57libGL error: failed
to open DRM: Operation not permitted
) = 57
write(2, "libGL error: reverting to (slow)"..., 52libGL error:
reverting to (slow) indirect rendering
) = 52
mmap2(NULL, 266240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0xb7b68000
write(3, "\222\3\2\0\0\0\0\0\220\24$\2\1\0\0\0\2\0\0\0\200\10\0\0"...,
2544) = 2544

This with libGL and glxgears from FC2 updated RPMs 
 xorg-x11-Mesa-libGL-6.7.0-11
 xorg-x11-tools-6.7.0-11

--alessandro
 
 "And every dream, every, is just a dream after all"
  
    (Heather Nova, "Paper Cup")
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/