[PATCH v3 0/3] Add support for Variscite DART-MX8M-PLUS and Sonata board

[Stefano Radaelli]

This patch series adds support for the Variscite DART-MX8M-PLUS
system on module and the Sonata carrier board.

The series includes:
- SOM device tree with on-module peripherals
- Sonata carrier board device tree with board-specific features

The implementation follows the standard SOM + carrier board pattern
where the SOM dtsi contains only peripherals mounted on the module,
while carrier-specific interfaces are enabled in the board dts.

v2->v3:
 - Fixed wrong som eth phy address

v1->v2:
 - Fixed wrong sai peripheral reference
 - Fixed wrong eqos pinctrl gpio
 - Fixed model name
 - Added new usdhc2 regulator pinctrl
 - Adjusted irq edges

Stefano Radaelli (3):
  dt-bindings: arm: fsl: add Variscite DART-MX8M PLUS Boards
  arm64: dts: freescale: Add support for Variscite DART-MX8M-PLUS
  arm64: dts: imx8mp-var-dart: Add support for Variscite Sonata board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-var-dart-sonata.dts  | 723 ++++++++++++++++++
 .../boot/dts/freescale/imx8mp-var-dart.dtsi   | 476 ++++++++++++
 4 files changed, 1206 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-var-dart.dtsi


base-commit: be580423d3f84b84a2f549df91e66bc4f54eda02
-- 
2.47.3