Re: [2.6.25.1] qla2xxx can't see more than 4 drives

[Gerhard Mack]

On Tue, 6 May 2008, Andrew Vasquez wrote:
> On Tue, 06 May 2008, Gerhard Mack wrote:
> 
> > On Tue, 6 May 2008, Andrew Vasquez wrote:
> > > Could you load the driver with the ql2xextended_error_logging module
> > > parameter set to 1 and send the resultant driver logs?  Also, it would
> > > could you also send the output of the following after the driver is
> > > loaded:
> > > 
> > > $ cat /sys/class/fc_host/host<host_no>
> > > $ cat /sys/class/scsi_host/host<host_no>/*
> > > $ cat /sys/class/fc_remote_ports/*
> > > 
> > > where host_no corresponds to the SCSI host-number assigned to the HBA.
> > > 
> > Of course.. 
> > 
> > QLogic Fibre Channel HBA Driver
> > qla2xxx 0000:02:0a.0: Found an ISP2312, irq 24, iobase 0xf88cc000
> > qla2xxx 0000:02:0a.0: Configuring PCI space...
> > qla2xxx 0000:02:0a.0: Configure NVRAM parameters...
> > qla2xxx 0000:02:0a.0: Verifying loaded RISC code...
> > scsi(4): **** Load RISC code ****
> ...
> > cat /sys/class/fc_host/host4/* :
> > 0x200000e08b127d20
> > 0
> > 0x200000e08b127d20
> > 0
> > 0x000001
> > 0x210000e08b127d20
> > Online
> > LPort (private loop)
> 
> Hmm, qla2xxx has a 'split' port-discovery model based on topology.
> Switched fabric (P2P) discovery and logins are managed by the driver.
> FC_AL topology discovery and logins are managed by firmware.  The
> driver (qla2xxx) simply asks the firmware for a list of recognized
> ports, as you've noted the driver (and indirectly, firmware), only
> recognized 4 ports during LIPA/LIHA/LISA address negotiation:
> 
> > cat /sys/class/fc_remote_ports/rport-4\:0-0/*  :
> > 0x2200000c507ce546
> ...
> > cat /sys/class/fc_remote_ports/rport-4\:0-1/*
> > 0x22000004cf69c688
> ...
> > cat /sys/class/fc_remote_ports/rport-4\:0-2/* | log
> > 0x2200000c507ce809
> ...
> > cat /sys/class/fc_remote_ports/rport-4\:0-3/* :
> > 0x22000004cf69b98f
> ...
> 
> 
> You mentioned that the 'BIOS' configuration program recognizes 6
> devices, have there been any changes made via the BIOS utility to
> 
> * assign a hard-loop id?
> * acquire a loop-id during LIPA?
> 
> or any changes above and beyond 'default' settings?  If so, could you
> 'retrore' default settings within BIOS utility?

Hmm your right.. it's only showing 4 drives in the BIOS utility.  Don't 
know why I recall seeing more ealier.

It's back to default and only showing 4 drives.

	Gerhard



--
Gerhard Mack

gmack@xxxxxxxxxxxxx

<>< As a computer I find your faith in technology amusing.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/