Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support

[sundeep subbaraya]

Hi Felipe,

On Thu, Apr 3, 2014 at 8:28 PM, Felipe Balbi <balbi@xxxxxx> wrote:

>> +static int start_dma(struct xusb_ep *ep, u32 src, u32 dst, u32 length)
>
> please prepend this with xudc_, it makes tracing a lot easier.
>
>> +{
>> +     struct xusb_udc *udc;
>> +     int rc = 0;
>> +     unsigned long timeout;
>> +
>> +     udc = ep->udc;
>> +     /*
>> +      * Set the addresses in the DMA source and
>> +      * destination registers and then set the length
>> +      * into the DMA length register.
>> +      */
>> +     udc->write_fn(udc->base_address, XUSB_DMA_DSAR_ADDR_OFFSET, src);
>> +     udc->write_fn(udc->base_address, XUSB_DMA_DDAR_ADDR_OFFSET, dst);
>> +     udc->write_fn(udc->base_address, XUSB_DMA_LENGTH_OFFSET, length);
>> +
>> +     /*
>> +      * Wait till DMA transaction is complete and
>> +      * check whether the DMA transaction was
>> +      * successful.
>> +     */
>> +     while ((udc->read_fn(ep->udc->base_address + XUSB_DMA_STATUS_OFFSET) &
>> +                     XUSB_DMA_DMASR_BUSY) == XUSB_DMA_DMASR_BUSY) {
>> +             timeout = jiffies + 10000;
>> +
>> +             if (time_after(jiffies, timeout)) {
>> +                     rc = -ETIMEDOUT;
>> +                     goto clean;
>> +             }
>> +     }
>
> don't you get an IRQ for DMA completion ? If you do, you could be using
> wait_for_completion()

This function is called in interrupt context when buffer is ready or
free. It initiates
DMA to transfer data from IP buffer to memory. Hence it waits in busy
loop till DMA
completes

Thanks,
Sundeep.B.S.
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/