Re: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node

[Nicolas Ferre]

On 24/12/2013 03:36, Wenyou Yang :
> Reviwed-by: Mark Brown <broonie@xxxxxxxxxx>
> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>

Wenyou,

While collecting patches for our next at91-3.16-dt branch I noticed this
patch that should go on top of the SAMA5D3 CMP board.

I would prefer to create another .dtsi file for CMP board and not mix
with the current cpu module usual board that does not contain this
regulator. But well we can do something even more simpler and move this
PMIC example to the newer SAMA5D3 Xplained board.

So, will it be possible for you to re-send a new patch targeted to
SAMA5D3 Xplained?

Thanks, bye.


> ---
>  arch/arm/boot/dts/sama5d3xcm.dtsi |   46 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
> index 726a0f3..3d4e5c2 100644
> --- a/arch/arm/boot/dts/sama5d3xcm.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
> @@ -38,6 +38,52 @@
>  			macb0: ethernet@f0028000 {
>  				phy-mode = "rgmii";
>  			};
> +
> +			i2c1: i2c@f0018000 {
> +				pmic: act8865@5b {
> +					compatible = "active-semi,act8865";
> +					reg = <0x5b>;
> +					status = "disabled";
> +
> +					regulators {
> +						vcc_1v8_reg: DCDC_REG1 {
> +							regulator-name = "VCC_1V8";
> +							regulator-min-microvolt = <1800000>;
> +							regulator-max-microvolt = <1800000>;
> +							regulator-always-on;
> +						};
> +
> +						vcc_1v2_reg: DCDC_REG2 {
> +							regulator-name = "VCC_1V2";
> +							regulator-min-microvolt = <1100000>;
> +							regulator-max-microvolt = <1300000>;
> +							regulator-suspend-mem-microvolt = <1150000>;
> +							regulator-suspend-standby-microvolt = <1150000>;
> +							regulator-always-on;
> +						};
> +
> +						vcc_3v3_reg: DCDC_REG3 {
> +							regulator-name = "VCC_3V3";
> +							regulator-min-microvolt = <3300000>;
> +							regulator-max-microvolt = <3300000>;
> +							regulator-always-on;
> +						};
> +
> +						vddana_reg: LDO_REG1 {
> +							regulator-name = "VDDANA";
> +							regulator-min-microvolt = <3300000>;
> +							regulator-max-microvolt = <3300000>;
> +							regulator-always-on;
> +						};
> +
> +						vddfuse_reg: LDO_REG2 {
> +							regulator-name = "FUSE_2V5";
> +							regulator-min-microvolt = <2500000>;
> +							regulator-max-microvolt = <2500000>;
> +						};
> +					};
> +				};
> +			};
>  		};
>  
>  		nand0: nand@60000000 {
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/