Re: [PATCH v15 12/12] drm: bridge/dw_hdmi: add rockchip rk3288 support

[Andy Yan]

Hi Philipp:
On 2014å12æ02æ 18:24, Philipp Zabel wrote:
> Hi Andy,
>
> Am Dienstag, den 02.12.2014, 15:45 +0800 schrieb Andy Yan:
> [...]
> > +static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
> > +				 void *data)
> > +{
> > +	struct platform_device *pdev = to_platform_device(dev);
> > +	const struct dw_hdmi_plat_data *plat_data;
> > +	const struct of_device_id *match;
> > +	struct drm_device *drm = data;
> > +	struct drm_encoder *encoder;
> > +	struct rockchip_hdmi *hdmi;
> > +	int ret;
> > +
> > +	if (!pdev->dev.of_node)
> > +		return -ENODEV;
> > +
> > +	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
> > +	if (!hdmi)
> > +		return -ENOMEM;
> > +
> > +	match = of_match_node(dw_hdmi_rockchip_ids, pdev->dev.of_node);
> > +	plat_data = match->data;
> > +	hdmi->dev = &pdev->dev;
> > +	encoder = &hdmi->encoder;
> > +	platform_set_drvdata(pdev, hdmi);
> > +
> > +	ret = rockchip_hdmi_parse_dt(hdmi);
> > +	if (ret) {
> > +		dev_err(hdmi->dev, "Unable to parse OF data\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = clk_prepare_enable(hdmi->clk);
> > +	if (ret) {
> > +		dev_err(hdmi->dev, "Cannot enable HDMI clock: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = clk_prepare_enable(hdmi->hdcp_clk);
> > +	if (ret) {
> > +		dev_err(hdmi->dev, "Cannot enable HDMI hdcp clock: %d\n", ret);
> > +		return ret;
> > +	}
> Could we have a look at the clocks again? Basically the Rockchip clock
> handling is exactly the same, except the clocks are called by other
> names.
>
> On i.MX6, according to the reference manual, the HDMI TX module has four
> clock inputs: "iahbclk" (bus clock), "icecclk" (32 kHz CEC clock),
> "ihclk" (module clock), and "isfrclk" (27 MHz internal SFR clock).
> The "iahbclk" and "ihclk" are both sourced from the SoC AHB root clock,
> the 32 kHz reference input can't be gated, and the "isfrclk" has its own
> gate.
>
> Does the HDMI TX implementation on Rockchip still have the separate
> external sfr bus and module clock inputs? I assume that your "clk" input
> is a single gate bit for bus and module clocks at the same time?
> If possible, I'd prefer to find a common binding for the clocks with
> some of the clocks being optional, but for that we need to know the
> actual clock inputs to the HDMI TX module.
>
> regards
> Philipp
    There are three  individual clock inputs on Rockchip RK3288 HDMI: 
"hdmi_ctrl_clk",
    "hdmi_cec_clk", "hdmi_hdcp_clk", the three clocks are responsible 
for different
     functions as their name described, and have their own private gate 
bit. That is
     to say, the cec_clk and hdcp_clk can all be disabled if we don't 
need hdcp and cec
     function.
     So I think it's better to make the clk control platform independent.

    Heiko, do you have any suggestions?
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/