Re: [PATCH v5 34/61] dmaengine: omap: Split device_control

[Maxime Ripard]

Hi Vinod,

On Fri, Dec 05, 2014 at 07:57:02PM +0530, Vinod Koul wrote:
> On Mon, Nov 17, 2014 at 02:42:28PM +0100, Maxime Ripard wrote:
> > Split the device_control callback of the TI OMAP DMA driver to make use
> > of the newly introduced callbacks, that will eventually be used to retrieve
> > slave capabilities.
> > 
> > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/dma/omap-dma.c | 51 +++++++++++++++-----------------------------------
> >  1 file changed, 15 insertions(+), 36 deletions(-)
> > 
> > diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> > index a8aa5b6bb5e2..1cadf812f3b3 100644
> > --- a/drivers/dma/omap-dma.c
> > +++ b/drivers/dma/omap-dma.c
> > @@ -948,8 +948,10 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
> >  	return vchan_tx_prep(&c->vc, &d->vd, flags);
> >  }
> >  
> > -static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *cfg)
> > +static int omap_dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
> >  {
> > +	struct omap_chan *c = to_omap_dma_chan(chan);
> > +
> >  	if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
> >  	    cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
> >  		return -EINVAL;
> > @@ -959,8 +961,9 @@ static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *c
> >  	return 0;
> >  }
> >  
> > -static int omap_dma_terminate_all(struct omap_chan *c)
> > +static int omap_dma_terminate_all(struct dma_chan *chan)
> >  {
> > +	struct omap_chan *c = to_omap_dma_chan(chan);
> >  	struct omap_dmadev *d = to_omap_dma_dev(c->vc.chan.device);
> >  	unsigned long flags;
> >  	LIST_HEAD(head);
> > @@ -996,8 +999,10 @@ static int omap_dma_terminate_all(struct omap_chan *c)
> >  	return 0;
> >  }
> >  
> > -static int omap_dma_pause(struct omap_chan *c)
> > +static int omap_dma_pause(struct dma_chan *chan)
> >  {
> > +	struct omap_chan *c = to_omap_dma_chan(chan);
> > +
> >  	/* Pause/Resume only allowed with cyclic mode */
> >  	if (!c->cyclic)
> >  		return -EINVAL;
> > @@ -1010,8 +1015,10 @@ static int omap_dma_pause(struct omap_chan *c)
> >  	return 0;
> >  }
> >  
> > -static int omap_dma_resume(struct omap_chan *c)
> > +static int omap_dma_resume(struct dma_chan *chan)
> >  {
> > +	struct omap_chan *c = to_omap_dma_chan(chan);
> > +
> >  	/* Pause/Resume only allowed with cyclic mode */
> >  	if (!c->cyclic)
> >  		return -EINVAL;
> > @@ -1029,37 +1036,6 @@ static int omap_dma_resume(struct omap_chan *c)
> >  	return 0;
> >  }
> >  
> > -static int omap_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> > -	unsigned long arg)
> > -{
> > -	struct omap_chan *c = to_omap_dma_chan(chan);
> > -	int ret;
> > -
> > -	switch (cmd) {
> > -	case DMA_SLAVE_CONFIG:
> > -		ret = omap_dma_slave_config(c, (struct dma_slave_config *)arg);
> > -		break;
> > -
> > -	case DMA_TERMINATE_ALL:
> > -		ret = omap_dma_terminate_all(c);
> > -		break;
> > -
> > -	case DMA_PAUSE:
> > -		ret = omap_dma_pause(c);
> > -		break;
> > -
> > -	case DMA_RESUME:
> > -		ret = omap_dma_resume(c);
> > -		break;
> > -
> > -	default:
> > -		ret = -ENXIO;
> > -		break;
> > -	}
> > -
> > -	return ret;
> > -}
> > -
> >  static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
> >  {
> >  	struct omap_chan *c;
> > @@ -1136,7 +1112,10 @@ static int omap_dma_probe(struct platform_device *pdev)
> >  	od->ddev.device_issue_pending = omap_dma_issue_pending;
> >  	od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg;
> >  	od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic;
> > -	od->ddev.device_control = omap_dma_control;
> this should be assigned to omap_dma_slave_config. omap_dma_control is not
> here :(

I'm not sure what you mean here. I'm removing this line, together with
the whole omap_dma_control function.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature