Re: [PATCH 3/7] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support

[Peter Griffin]

Hi Paul,

Thanks for reviewing.

On Thu, 09 Jul 2015, Paul Bolle wrote:

> On wo, 2015-07-08 at 17:11 +0100, Peter Griffin wrote:
> > --- a/drivers/dma/Kconfig
> > +++ b/drivers/dma/Kconfig
>  
> > +config ST_FDMA
> > +	bool "ST FDMA dmaengine support"
> > +	depends on ARCH_STI
> > +	select DMA_ENGINE
> > +	select FW_LOADER
> > +	select FW_LOADER_USER_HELPER_FALLBACK
> > +	select LIBELF_32
> > +	select DMA_VIRTUAL_CHANNELS
> > +	help
> > +	  Enable support for ST FDMA controller.
> > +	  It supports 16 independent DMA channels, accepts up to 32 DMA requests
> > +
> > +	  Say Y here if you have such a chipset.
> > +	  If unsure, say N.
> 
> > --- a/drivers/dma/Makefile
> > +++ b/drivers/dma/Makefile
> > 
> > +obj-$(CONFIG_ST_FDMA) += st_fdma.o
> 
> ST_FDMA is a bool symbol, so st_fdma.o can only be built-in.

Yes good spot, that is a mistake it should be tristate. Will fix in v2.

> 
> > --- /dev/null
> > +++ b/drivers/dma/st_fdma.c
> 
> > +#include <linux/module.h>
> 
> Needed?
> 
> > +void *st_fdma_seg_to_mem(struct st_fdma_dev *fdev, u64 da, int len)
> 
> static?

Fixed in v2.

> 
> > +{
> > +	[...]
> > +}
> 
> > +static int
> > +st_fdma_elf_load_segments(struct st_fdma_dev *fdev, const struct 
> > firmware *fw)
> > +{
> > +	[...]
> > +		dst = st_fdma_seg_to_mem(fdev, da, memsz);
> > +		[...]
> > +}
> 
> > +static const struct of_device_id st_fdma_match[] = {
> > +	{ .compatible = "st,fdma_mpe31", .data = &fdma_mpe31 },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, st_fdma_match);
> 
> MODULE_DEVICE_TABLE() is preprocessed away for built-in only code.
> 
> > +static int __exit st_fdma_remove(struct platform_device *pdev)
> > +{
> > +	struct st_fdma_dev *fdev = platform_get_drvdata(pdev);
> > +
> > +	wait_for_completion(&fdev->fw_ack);
> > +
> > +	st_fdma_clk_disable(fdev);
> > +
> > +	return 0;
> > +}
> 
> Since this driver is built-in only this means st_fdma_remove() can never
> be used, right?

Will be capable of being a module in v2.

> 
> > +static struct platform_driver st_fdma_platform_driver = {
> > +	.driver = {
> > +		.name = "st-fdma",
> > +		.of_match_table = st_fdma_match,
> > +		.pm = ST_FDMA_PM,
> > +	},
> > +	.probe = st_fdma_probe,
> > +	.remove = st_fdma_remove,
> > +};
> > +module_platform_driver(st_fdma_platform_driver);
> 
> So can .remove be dropped?
> 
> Since v4.2-rc1 there's builtin_platform_driver() for built-in only code.

Thanks for the pointer, I wasn't aware of that function.

> 
> > +bool st_fdma_filter_fn(struct dma_chan *chan, void *param)
> > +{
> > +	[...]
> > +}
> > +EXPORT_SYMBOL(st_fdma_filter_fn);
> 
> This series adds no users of this export. I suppose they will be added
> in another series. Is that correct?

No the export is not required. Will fix in v2.

> 
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("STMicroelectronics FDMA engine driver");
> > +MODULE_AUTHOR("Ludovic.barre <Ludovic.barre@xxxxxx>");
> 
> These macros will, basically, be preprocessed away for built-in only
> code.

The driver will be capable of being a module in v2.

regards,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/