[PATCH] net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettings

From: Philippe Reynes
Date: Sun Feb 19 2017 - 17:07:59 EST

Next message: H. Nikolaus Schaller: "Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation"
Previous message: Arushi Singhal: "[PATCH 1/2] staging: ks7010: Unnecessary parentheses are removed to make coder nicer."
Next in thread: David Miller: "Re: [PATCH] net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
---
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 94 ++++++++-------
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 6 +-
.../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 132 ++++++++++---------
3 files changed, 123 insertions(+), 109 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index bdbcd2b..99b187b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -3252,12 +3252,13 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
return config;
}

-int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
- struct ethtool_cmd *ecmd)
+int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter,
+ struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 config = 0;
int status = 0;
+ u32 supported, advertising;

if (!test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
/* Get port configuration info */
@@ -3271,45 +3272,48 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;

if (netif_running(adapter->netdev) && ahw->has_link_events) {
- ethtool_cmd_speed_set(ecmd, ahw->link_speed);
- ecmd->duplex = ahw->link_duplex;
- ecmd->autoneg = ahw->link_autoneg;
+ ecmd->base.speed = ahw->link_speed;
+ ecmd->base.duplex = ahw->link_duplex;
+ ecmd->base.autoneg = ahw->link_autoneg;
} else {
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
- ecmd->autoneg = AUTONEG_DISABLE;
+ ecmd->base.speed = SPEED_UNKNOWN;
+ ecmd->base.duplex = DUPLEX_UNKNOWN;
+ ecmd->base.autoneg = AUTONEG_DISABLE;
}

- ecmd->supported = (SUPPORTED_10baseT_Full |
+ supported = (SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_Autoneg);

- if (ecmd->autoneg == AUTONEG_ENABLE) {
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ ecmd->link_modes.advertising);
+
+ if (ecmd->base.autoneg == AUTONEG_ENABLE) {
if (ahw->port_config & QLC_83XX_10_CAPABLE)
- ecmd->advertising |= SUPPORTED_10baseT_Full;
+ advertising |= SUPPORTED_10baseT_Full;
if (ahw->port_config & QLC_83XX_100_CAPABLE)
- ecmd->advertising |= SUPPORTED_100baseT_Full;
+ advertising |= SUPPORTED_100baseT_Full;
if (ahw->port_config & QLC_83XX_1G_CAPABLE)
- ecmd->advertising |= SUPPORTED_1000baseT_Full;
+ advertising |= SUPPORTED_1000baseT_Full;
if (ahw->port_config & QLC_83XX_10G_CAPABLE)
- ecmd->advertising |= SUPPORTED_10000baseT_Full;
+ advertising |= SUPPORTED_10000baseT_Full;
if (ahw->port_config & QLC_83XX_AUTONEG_ENABLE)
- ecmd->advertising |= ADVERTISED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
} else {
switch (ahw->link_speed) {
case SPEED_10:
- ecmd->advertising = SUPPORTED_10baseT_Full;
+ advertising = SUPPORTED_10baseT_Full;
break;
case SPEED_100:
- ecmd->advertising = SUPPORTED_100baseT_Full;
+ advertising = SUPPORTED_100baseT_Full;
break;
case SPEED_1000:
- ecmd->advertising = SUPPORTED_1000baseT_Full;
+ advertising = SUPPORTED_1000baseT_Full;
break;
case SPEED_10000:
- ecmd->advertising = SUPPORTED_10000baseT_Full;
+ advertising = SUPPORTED_10000baseT_Full;
break;
default:
break;
@@ -3319,56 +3323,58 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,

switch (ahw->supported_type) {
case PORT_FIBRE:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_FIBRE;
- ecmd->transceiver = XCVR_EXTERNAL;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ ecmd->base.port = PORT_FIBRE;
break;
case PORT_TP:
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
- ecmd->transceiver = XCVR_INTERNAL;
+ supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ ecmd->base.port = PORT_TP;
break;
case PORT_DA:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_DA;
- ecmd->transceiver = XCVR_EXTERNAL;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ ecmd->base.port = PORT_DA;
break;
default:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_OTHER;
- ecmd->transceiver = XCVR_EXTERNAL;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ ecmd->base.port = PORT_OTHER;
break;
}
- ecmd->phy_address = ahw->physical_port;
+ ecmd->base.phy_address = ahw->physical_port;
+
+ ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
+ advertising);
+
return status;
}

-int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter,
- struct ethtool_cmd *ecmd)
+int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter,
+ const struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 config = adapter->ahw->port_config;
int status = 0;

/* 83xx devices do not support Half duplex */
- if (ecmd->duplex == DUPLEX_HALF) {
- netdev_info(adapter->netdev,
- "Half duplex mode not supported\n");
- return -EINVAL;
+ if (ecmd->base.duplex == DUPLEX_HALF) {
+ netdev_info(adapter->netdev,
+ "Half duplex mode not supported\n");
+ return -EINVAL;
}

- if (ecmd->autoneg) {
+ if (ecmd->base.autoneg) {
ahw->port_config |= QLC_83XX_AUTONEG_ENABLE;
ahw->port_config |= (QLC_83XX_100_CAPABLE |
QLC_83XX_1G_CAPABLE |
QLC_83XX_10G_CAPABLE);
} else { /* force speed */
ahw->port_config &= ~QLC_83XX_AUTONEG_ENABLE;
- switch (ethtool_cmd_speed(ecmd)) {
+ switch (ecmd->base.speed) {
case SPEED_10:
ahw->port_config &= ~(QLC_83XX_100_CAPABLE |
QLC_83XX_1G_CAPABLE |
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index 331ae2c..3dfe8e2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -628,8 +628,10 @@ int qlcnic_83xx_get_vnic_vport_info(struct qlcnic_adapter *,
void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
int qlcnic_83xx_extend_md_capab(struct qlcnic_adapter *);
-int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
-int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
+int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter,
+ struct ethtool_link_ksettings *ecmd);
+int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter,
+ const struct ethtool_link_ksettings *ecmd);
void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,
struct ethtool_pauseparam *);
int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *,
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 0a2318c..9a869c1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -285,42 +285,43 @@ static int qlcnic_get_eeprom_len(struct net_device *dev)
sizeof(drvinfo->version));
}

-static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
- struct ethtool_cmd *ecmd)
+static int qlcnic_82xx_get_link_ksettings(struct qlcnic_adapter *adapter,
+ struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 speed, reg;
int check_sfp_module = 0, err = 0;
u16 pcifn = ahw->pci_func;
+ u32 supported, advertising;

/* read which mode */
if (adapter->ahw->port_type == QLCNIC_GBE) {
- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);

- ecmd->advertising = (ADVERTISED_100baseT_Half |
+ advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);

- ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
- ecmd->duplex = adapter->ahw->link_duplex;
- ecmd->autoneg = adapter->ahw->link_autoneg;
+ ecmd->base.speed = adapter->ahw->link_speed;
+ ecmd->base.duplex = adapter->ahw->link_duplex;
+ ecmd->base.autoneg = adapter->ahw->link_autoneg;

} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val = 0;
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR, &err);

if (val == QLCNIC_PORT_MODE_802_3_AP) {
- ecmd->supported = SUPPORTED_1000baseT_Full;
- ecmd->advertising = ADVERTISED_1000baseT_Full;
+ supported = SUPPORTED_1000baseT_Full;
+ advertising = ADVERTISED_1000baseT_Full;
} else {
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->advertising = ADVERTISED_10000baseT_Full;
+ supported = SUPPORTED_10000baseT_Full;
+ advertising = ADVERTISED_10000baseT_Full;
}

if (netif_running(adapter->netdev) && ahw->has_link_events) {
@@ -331,73 +332,72 @@ static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
}

- ethtool_cmd_speed_set(ecmd, ahw->link_speed);
- ecmd->autoneg = ahw->link_autoneg;
- ecmd->duplex = ahw->link_duplex;
+ ecmd->base.speed = ahw->link_speed;
+ ecmd->base.autoneg = ahw->link_autoneg;
+ ecmd->base.duplex = ahw->link_duplex;
goto skip;
}

- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
- ecmd->autoneg = AUTONEG_DISABLE;
+ ecmd->base.speed = SPEED_UNKNOWN;
+ ecmd->base.duplex = DUPLEX_UNKNOWN;
+ ecmd->base.autoneg = AUTONEG_DISABLE;
} else
return -EIO;

skip:
- ecmd->phy_address = adapter->ahw->physical_port;
- ecmd->transceiver = XCVR_EXTERNAL;
+ ecmd->base.phy_address = adapter->ahw->physical_port;

switch (adapter->ahw->board_type) {
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:

- ecmd->supported |= SUPPORTED_Autoneg;
- ecmd->advertising |= ADVERTISED_Autoneg;
+ supported |= SUPPORTED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
case QLCNIC_BRDTYPE_P3P_10G_CX4:
case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
- ecmd->autoneg = adapter->ahw->link_autoneg;
+ supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ ecmd->base.port = PORT_TP;
+ ecmd->base.autoneg = adapter->ahw->link_autoneg;
break;
case QLCNIC_BRDTYPE_P3P_IMEZ:
case QLCNIC_BRDTYPE_P3P_XG_LOM:
case QLCNIC_BRDTYPE_P3P_HMEZ:
- ecmd->supported |= SUPPORTED_MII;
- ecmd->advertising |= ADVERTISED_MII;
- ecmd->port = PORT_MII;
- ecmd->autoneg = AUTONEG_DISABLE;
+ supported |= SUPPORTED_MII;
+ advertising |= ADVERTISED_MII;
+ ecmd->base.port = PORT_MII;
+ ecmd->base.autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ supported |= SUPPORTED_TP;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_FIBRE;
- ecmd->autoneg = AUTONEG_DISABLE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ ecmd->base.port = PORT_FIBRE;
+ ecmd->base.autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_TP:
if (adapter->ahw->port_type == QLCNIC_XGBE) {
- ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
- ecmd->advertising |=
+ ecmd->base.autoneg = AUTONEG_DISABLE;
+ supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+ advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
- ecmd->port = PORT_FIBRE;
+ ecmd->base.port = PORT_FIBRE;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
} else {
- ecmd->autoneg = AUTONEG_ENABLE;
- ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
- ecmd->advertising |=
+ ecmd->base.autoneg = AUTONEG_ENABLE;
+ supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
+ advertising |=
(ADVERTISED_TP | ADVERTISED_Autoneg);
- ecmd->port = PORT_TP;
+ ecmd->base.port = PORT_TP;
}
break;
default:
@@ -412,47 +412,52 @@ static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
- ecmd->port = PORT_FIBRE;
+ ecmd->base.port = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
- ecmd->port = PORT_TP;
+ ecmd->base.port = PORT_TP;
break;
default:
- ecmd->port = PORT_OTHER;
+ ecmd->base.port = PORT_OTHER;
}
}

+ ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
+ advertising);
+
return 0;
}

-static int qlcnic_get_settings(struct net_device *dev,
- struct ethtool_cmd *ecmd)
+static int qlcnic_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);

if (qlcnic_82xx_check(adapter))
- return qlcnic_82xx_get_settings(adapter, ecmd);
+ return qlcnic_82xx_get_link_ksettings(adapter, ecmd);
else if (qlcnic_83xx_check(adapter))
- return qlcnic_83xx_get_settings(adapter, ecmd);
+ return qlcnic_83xx_get_link_ksettings(adapter, ecmd);

return -EIO;
}

static int qlcnic_set_port_config(struct qlcnic_adapter *adapter,
- struct ethtool_cmd *ecmd)
+ const struct ethtool_link_ksettings *ecmd)
{
u32 ret = 0, config = 0;
/* read which mode */
- if (ecmd->duplex)
+ if (ecmd->base.duplex)
config |= 0x1;

- if (ecmd->autoneg)
+ if (ecmd->base.autoneg)
config |= 0x2;

- switch (ethtool_cmd_speed(ecmd)) {
+ switch (ecmd->base.speed) {
case SPEED_10:
config |= (0 << 8);
break;
@@ -475,7 +480,8 @@ static int qlcnic_set_port_config(struct qlcnic_adapter *adapter,
return ret;
}

-static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+static int qlcnic_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *ecmd)
{
u32 ret = 0;
struct qlcnic_adapter *adapter = netdev_priv(dev);
@@ -484,16 +490,16 @@ static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
return -EOPNOTSUPP;

if (qlcnic_83xx_check(adapter))
- ret = qlcnic_83xx_set_settings(adapter, ecmd);
+ ret = qlcnic_83xx_set_link_ksettings(adapter, ecmd);
else
ret = qlcnic_set_port_config(adapter, ecmd);

if (!ret)
return ret;

- adapter->ahw->link_speed = ethtool_cmd_speed(ecmd);
- adapter->ahw->link_duplex = ecmd->duplex;
- adapter->ahw->link_autoneg = ecmd->autoneg;
+ adapter->ahw->link_speed = ecmd->base.speed;
+ adapter->ahw->link_duplex = ecmd->base.duplex;
+ adapter->ahw->link_autoneg = ecmd->base.autoneg;

if (!netif_running(dev))
return 0;
@@ -1822,8 +1828,6 @@ static int qlcnic_set_dump_mask(struct qlcnic_adapter *adapter, u32 mask)
}

const struct ethtool_ops qlcnic_ethtool_ops = {
- .get_settings = qlcnic_get_settings,
- .set_settings = qlcnic_set_settings,
.get_drvinfo = qlcnic_get_drvinfo,
.get_regs_len = qlcnic_get_regs_len,
.get_regs = qlcnic_get_regs,
@@ -1850,10 +1854,11 @@ static int qlcnic_set_dump_mask(struct qlcnic_adapter *adapter, u32 mask)
.get_dump_flag = qlcnic_get_dump_flag,
.get_dump_data = qlcnic_get_dump_data,
.set_dump = qlcnic_set_dump,
+ .get_link_ksettings = qlcnic_get_link_ksettings,
+ .set_link_ksettings = qlcnic_set_link_ksettings,
};

const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
- .get_settings = qlcnic_get_settings,
.get_drvinfo = qlcnic_get_drvinfo,
.get_regs_len = qlcnic_get_regs_len,
.get_regs = qlcnic_get_regs,
@@ -1872,12 +1877,13 @@ static int qlcnic_set_dump_mask(struct qlcnic_adapter *adapter, u32 mask)
.set_coalesce = qlcnic_set_intr_coalesce,
.set_msglevel = qlcnic_set_msglevel,
.get_msglevel = qlcnic_get_msglevel,
+ .get_link_ksettings = qlcnic_get_link_ksettings,
};

const struct ethtool_ops qlcnic_ethtool_failed_ops = {
- .get_settings = qlcnic_get_settings,
.get_drvinfo = qlcnic_get_drvinfo,
.set_msglevel = qlcnic_set_msglevel,
.get_msglevel = qlcnic_get_msglevel,
.set_dump = qlcnic_set_dump,
+ .get_link_ksettings = qlcnic_get_link_ksettings,
};
--
1.7.4.4

Next message: H. Nikolaus Schaller: "Re: [PATCH v9 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation"
Previous message: Arushi Singhal: "[PATCH 1/2] staging: ks7010: Unnecessary parentheses are removed to make coder nicer."
Next in thread: David Miller: "Re: [PATCH] net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]