[REGRESSION] Failed network caused by: xhci: switch to pci_alloc_irq_vectors

[Steven Rostedt]

One of my the configs I use to test ftrace with (configs that have
caused failures in the past), has lots of irq issues and fails to
initialize the network of my box. I bisected the problem down to a
single commit, and when I revert that commit, my box boots without any
network or irq issues.

Note, my other configs work fine on this box. I haven't investigated
which config is also the culprit. But since it use to work with this
config, I want to report it.

Here's the dmesg where things start to get messy:

 md: Waiting for all devices to be available before autodetect
 md: If you don't use raid, use raid=noautodetect
 md: Autodetecting RAID arrays.
 md: autorun ...
 md: ... autorun DONE.
 EXT4-fs (sda7): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
 irq 16: nobody cared (try booting with the "irqpoll" option)
 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.12.0-rc1-test-dirty #24
 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
 Call Trace:
  <IRQ>
 devtmpfs: mounted
  dump_stack+0x9a/0xd6
  __report_bad_irq+0x35/0xc0
  note_interrupt+0x234/0x270
  handle_irq_event_percpu+0x45/0x60
  handle_irq_event+0x39/0x60
  handle_fasteoi_irq+0x8f/0x160
  handle_irq+0x6f/0x110
  do_IRQ+0x46/0xd0
  common_interrupt+0x93/0x93
 RIP: 0010:native_safe_halt+0x6/0x10
 RSP: 0000:ffffb54240cd7e90 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff7e
 RAX: 0000000000000000 RBX: ffff8ea214498040 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb54240cd7e90 R08: 0000000000000001 R09: 0000000041129b0c
 R10: ffffb54240cd7d68 R11: 0000000000000001 R12: 0000000000000002
 R13: ffff8ea214498040 R14: 0000000000000000 R15: ffff8ea214498040
  </IRQ>
  default_idle+0x38/0x160
  arch_cpu_idle+0xf/0x20
  default_idle_call+0x28/0x50
  do_idle+0x182/0x220
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x132/0x160
  secondary_startup_64+0x9f/0x9f
 handlers:
 [<ffffffff9a6421a0>] xhci_msi_irq
 Disabling IRQ #16
 Freeing unused kernel memory: 3548K
 Write protecting the kernel read-only data: 16384k
 Freeing unused kernel memory: 1116K
 Freeing unused kernel memory: 1840K
 readahead: starting
nt /proc/bus/usb does not exist
		Welcome to Fedora 
		Press 'I' to enter interactive startup.
 udev: starting version 153
 udevd (244): /proc/244/oom_adj is deprecated, please use /proc/244/oom_score_adj instead.
: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for writing: Permission denied

 ehci_hcd: module verification failed: signature and/or required key missing - tainting kernel
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 ehci-pci 0000:00:1a.0: EHCI Host Controller
 ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
 ehci-pci 0000:00:1a.0: debug port 2
 ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
 genirq: Flags mismatch irq 16. 00000080 (ehci_hcd:usb3) vs. 00000000 (xhci_hcd)
 CPU: 0 PID: 307 Comm: modprobe Tainted: G            E   4.12.0-rc1-test-dirty #24
 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
 Call Trace:
  dump_stack+0x9a/0xd6
  __setup_irq+0x5d4/0x630
  request_threaded_irq+0x10d/0x190
  usb_add_hcd+0x658/0x970
  ? for_each_companion+0x3e/0xb0
  usb_hcd_pci_probe+0x3e4/0x490
  ehci_pci_probe+0x36/0x40 [ehci_pci]
  local_pci_probe+0x45/0xa0
  ? pci_match_device+0xca/0x110
  pci_device_probe+0xdb/0x130
  driver_probe_device+0x2ed/0x480
  __driver_attach+0xd5/0x100
  ? driver_probe_device+0x480/0x480
  bus_for_each_dev+0x62/0xa0
  driver_attach+0x1e/0x20
  bus_add_driver+0x1c6/0x290
  driver_register+0x60/0xe0
  __pci_register_driver+0x60/0x70
  ? 0xffffffffc0346000
  ehci_pci_init+0x6a/0x1000 [ehci_pci]
  do_one_initcall+0x43/0x190
  ? kmem_cache_alloc_trace+0x1be/0x200
  do_init_module+0x7d/0x210
  load_module+0x1891/0x1eb0
  ? vmap_page_range_noflush+0x29b/0x370
  ? show_coresize+0x30/0x30
  SYSC_init_module+0x143/0x180
  ? load_module+0x5/0x1eb0
  ? SYSC_init_module+0x143/0x180
  SyS_init_module+0xe/0x10
  entry_SYSCALL_64_fastpath+0x23/0xc2
 RIP: 0033:0x3b918e0ffa
 RSP: 002b:00007ffd11d575c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
 RAX: ffffffffffffffda RBX: 000000000061f950 RCX: 0000003b918e0ffa
 RDX: 000000000061f7d0 RSI: 00000000000036b0 RDI: 000000000062c9e0
 RBP: 0000000000000000 R08: 0000000000630090 R09: 00007f019c07c700
 R10: 00007ffd11d574f0 R11: 0000000000000246 R12: 0000000000626200
 R13: 000000000061f930 R14: 0000000000000000 R15: 000000000061f420
 ehci-pci 0000:00:1a.0: request interrupt 16 failed
 ehci-pci 0000:00:1a.0: USB bus 3 deregistered
 ehci-pci 0000:00:1a.0: init 0000:00:1a.0 fail, -16
 ehci-pci: probe of 0000:00:1a.0 failed with error -16
 ehci-pci 0000:00:1d.0: EHCI Host Controller
 ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
 ehci-pci 0000:00:1d.0: debug port 2
 ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
 ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000
 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 2 ports detected
 sr 0:0:0:0: Attached scsi generic sg0 type 5
 sd 1:0:0:0: Attached scsi generic sg1 type 0
 r8169 0000:02:00.0 eth2: renamed from eth0
 usb 3-1: new high-speed USB device number 2 using ehci-pci
 hub 3-1:1.0: ignoring external hub
 xhci_hcd 0000:00:14.0: Error while assigning device slot ID
 xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
 usb usb1-port5: couldn't allocate usb_device


Setting up Logical Volume Management:   1 logical volume(s) in volume group "vg00" now active
  3 logical volume(s) in volume group "fedora" now active

Checking filesystems
Checking all file systems.
 fsck.ext4 -a /dev/sda7 
/dev/sda7: clean, 210030/1313760 files, 1911684/5245214 blocks

 EXT4-fs (sda7): re-mounted. Opts: (null)

 EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)



Entering non-interactive startup
Starting monitoring for VG fedora:   3 logical volume(s) in volume group "fedora" monitored

Starting monitoring for VG vg00:   1 logical volume(s) in volume group "vg00" monitored

ip6tables: Applying firewall rules: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Module ip6_tables not found.
ip6tables-restore v1.4.7: ip6tables-restore: unable to initialize table 'filter'

Error occurred at line: 3
Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information.

iptables: Applying firewall rules: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Module ip_tables not found.
iptables-restore v1.4.7: iptables-restore: unable to initialize table 'filter'

Error occurred at line: 3
Try `iptables-restore -h' or 'iptables-restore --help' for more information.







Tried to locate /boot/vmlinuz-4.12.0-rc1-test-dirty
Cannot open `/boot/vmlinuz-4.12.0-rc1-test-dirty': stream error




 r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
 r8169 0000:02:00.0 eth2: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
 genirq: Flags mismatch irq 16. 00000080 (eth2) vs. 00000000 (xhci_hcd)
 CPU: 1 PID: 934 Comm: NetworkManager Tainted: G            E   4.12.0-rc1-test-dirty #24
 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
 Call Trace:
  dump_stack+0x9a/0xd6
  __setup_irq+0x5d4/0x630
  request_threaded_irq+0x10d/0x190
  rtl_open+0x4af/0xc80
  __dev_open+0x95/0xf0
  __dev_change_flags+0x9d/0x160
  dev_change_flags+0x29/0x60
  do_setlink+0x306/0xc60
  ? sched_clock+0x13/0x20
  ? sched_clock+0x13/0x20
  ? sched_clock_local+0x17/0x90
  ? deactivate_slab+0x592/0x600
  ? nla_parse+0x35/0x140
  rtnl_setlink+0xe2/0x130
  rtnetlink_rcv_msg+0x8a/0x1f0
  ? rtnetlink_rcv+0x1b/0x40
  ? rtnl_newlink+0x910/0x910
  netlink_rcv_skb+0xd3/0xf0
  rtnetlink_rcv+0x2a/0x40
  netlink_unicast+0x165/0x1e0
  netlink_sendmsg+0x26b/0x340
  ___sys_sendmsg+0x2e9/0x300
  ? ___sys_recvmsg+0x174/0x200
  ? SYSC_sendto+0x102/0x180
  __sys_sendmsg+0x45/0x80
  ? ___sys_sendmsg+0x5/0x300
  ? __sys_sendmsg+0x45/0x80
  SyS_sendmsg+0x12/0x20
  entry_SYSCALL_64_fastpath+0x23/0xc2
 RIP: 0033:0x3b91c0eac0
 RSP: 002b:00007ffe79384be8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000000713400 RCX: 0000003b91c0eac0
 RDX: 0000000000000000 RSI: 00007ffe79384c30 RDI: 0000000000000009
 RBP: 00007ffe79384ac8 R08: 0000000000001003 R09: 0000000000000004
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000000002 R14: ffffffffffffff58 R15: 00007ffe79384b10


Starting RPC idmapd: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Module sunrpc not found.
FATAL: Error running install command for sunrpc
Error: RPC MTAB does not exist.


I attached the full dmesg as well as my .config.

-- Steve

Attachment: dmesg.gz
Description: application/gzip

Attachment: config.gz
Description: application/gzip