[PATCH net-next 8/9] Revert "net: bcmgenet: Software reset EPHY after power on"

From: Doug Berger
Date: Wed Oct 25 2017 - 18:05:26 EST


With commit f7d72996e222 ("net: bcmgenet: enable loopback during
UniMAC sw_reset") it is no longer necessary to force the software
reset of the internal EPHY before resetting the UniMAC to ensure a
clean reset.

Therefore this commit reverts commit 5dbebbb44a6a ("net: bcmgenet:
Software reset EPHY after power on").

Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 -
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 -
drivers/net/ethernet/broadcom/genet/bcmmii.c | 16 ----------------
3 files changed, 18 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 91f52c1b5108..54b09a01cb2c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1172,7 +1172,6 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv,
}
bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
bcmgenet_phy_power_set(priv->dev, true);
- bcmgenet_mii_reset(priv->dev);
break;

case GENET_POWER_CABLE_SENSE:
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 4c49d0b97748..35f18a8d1ce6 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -711,7 +711,6 @@ int bcmgenet_mii_init(struct net_device *dev);
int bcmgenet_mii_config(struct net_device *dev, bool init);
int bcmgenet_mii_probe(struct net_device *dev);
void bcmgenet_mii_exit(struct net_device *dev);
-void bcmgenet_mii_reset(struct net_device *dev);
void bcmgenet_phy_power_set(struct net_device *dev, bool enable);
void bcmgenet_mii_setup(struct net_device *dev);

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 18f5723be2c9..a5ae9b78389c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -121,22 +121,6 @@ static int bcmgenet_fixed_phy_link_update(struct net_device *dev,
return 0;
}

-/* Perform a voluntary PHY software reset, since the EPHY is very finicky about
- * not doing it and will start corrupting packets
- */
-void bcmgenet_mii_reset(struct net_device *dev)
-{
- struct bcmgenet_priv *priv = netdev_priv(dev);
-
- if (GENET_IS_V4(priv))
- return;
-
- if (priv->phydev) {
- phy_init_hw(priv->phydev);
- phy_start_aneg(priv->phydev);
- }
-}
-
void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
--
2.14.1