[PATCH 7/8] x86/MCE/AMD: Get address from already initialized block

From: Borislav Petkov
Date: Wed Feb 21 2018 - 05:19:54 EST


From: Yazen Ghannam <yazen.ghannam@xxxxxxx>

The block address is saved after the block is initialized when
threshold_init_device() is called.

Use the saved block address, if available, rather than trying to
rediscover it.

This will avoid a call trace, when resuming from suspend, due to the
rdmsr_safe_on_cpu() call in get_block_address(). The rdmsr_safe_on_cpu()
call issues an IPI but we're running with interrupts disabled. This
triggers:

WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0

Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx>
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: linux-edac <linux-edac@xxxxxxxxxxxxxxx>
Cc: x86-ml <x86@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 4.14.x
Link: https://lkml.kernel.org/r/20180215210943.11530-3-Yazen.Ghannam@xxxxxxx
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
---
arch/x86/kernel/cpu/mcheck/mce_amd.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index d8ba9d0c3f01..12bc2863a4d6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -436,6 +436,21 @@ static u32 get_block_address(unsigned int cpu, u32 current_addr, u32 low, u32 hi
{
u32 addr = 0, offset = 0;

+ if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
+ return addr;
+
+ /* Get address from already initialized block. */
+ if (per_cpu(threshold_banks, cpu)) {
+ struct threshold_bank *bankp = per_cpu(threshold_banks, cpu)[bank];
+
+ if (bankp && bankp->blocks) {
+ struct threshold_block *blockp = &bankp->blocks[block];
+
+ if (blockp)
+ return blockp->address;
+ }
+ }
+
if (mce_flags.smca) {
if (smca_get_bank_type(bank) == SMCA_RESERVED)
return addr;
--
2.13.0