Re: [PATCH v2 1/3] Input: gpio-keys - add support for wakeup event action

[JeffyChen]

Hi Brian,

Thanks for your reply.

On 02/13/2018 06:13 AM, Brian Norris wrote:
> > >
> > >  	if (bdata->gpiod) {
> > >+		int active_low = gpiod_is_active_low(bdata->gpiod);
> > >+
> > >  		if (button->debounce_interval) {
> > >  			error = gpiod_set_debounce(bdata->gpiod,
> > >  					button->debounce_interval * 1000);
> > >@@ -568,6 +572,16 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
> > >  		isr = gpio_keys_gpio_isr;
> > >  		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
> > >
> > >+		switch (button->wakeup_event_action) {
> > >+		case EV_ACT_ASSERTED:
> > >+			bdata->wakeup_trigger_type = active_low ?
> > >+				IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
> > >+			break;
> > >+		case EV_ACT_DEASSERTED:
> > >+			bdata->wakeup_trigger_type = active_low ?
> > >+				IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
> > >+			break;
> What about EV_ACT_ANY? And default case? I think for ANY, we're OK
> letting suspend/resume not reconfigure the trigger type, but maybe a
> comment here to note that?
right, will add comment in the next version.
> > >+		}
> > >  	} else {
> What about the 'else' case? Shouldn't we try to handle that?
i think the else case is for irq key, which would generate down and up 
events in one irq, so it would use the same trigger type for all these 3 
cases.

i'll add comment in the next version too.
> Brian