Re: [PATCH v2 0/7] R-Car M3-N DTS fixes
From: Simon Horman
Date: Fri Feb 23 2018 - 09:52:09 EST
On Fri, Feb 23, 2018 at 02:40:52PM +0100, Jacopo Mondi wrote:
> Hello,
> in this second iteration I have fixed two remarks from Geert received on
> v1:
> - Extend "du" address length to include third channel
> - Move usb2_phy1 device node next to usb2_phy0
>
> Two minor nits were not addressed:
> - "placeholder" comment position not changed to maintain consistency with
> placeholders in M3-W. When they'll get changed, let's change all of them at
> the same time.
> - The addresses block sizes (and multiple address range blocks) are still there
> (next time we can consider dropping the unit address from place-holder nodes
> and do not add any "reg" property at all, until DTC won't start complaining
> about this as well)
>
> All patches but the newly introduced 7/7 now have Geert's Reviewed-by tag.
>
> Simon: as per v1, this series is based on my M3-N enablement series, last
> patch on Ether-AVB excluded.
>
> Thanks
> j
>
> v1 -> v2:
> - Extend "du" address length to include third channel
> - Move usb2_phy1 node next to usb2_phy0
>
> Jacopo Mondi (7):
> arm64: dts: renesas: r8a77965: Add "reg" properties
> arm64: dts: renesas: r8a77965: Add #address-cells and #size-cells
> arm64: dts: renesas: r8a77965: Remove stale reg property
> arm64: dts: renesas: r8a77965: Add #phy-cells property
> arm64: dts: renesas: r8a77965: Add #pwm-cells property
> arm64: dts: renesas: r8a77965: Add #interrupt-cells property
> arm64: dts: renesas: r8a77965: Move usb2_phy1 up
>
> arch/arm64/boot/dts/renesas/r8a77965.dtsi | 89 +++++++++++++++++++++++++++++--
Thanks, applied.