Re: [PATCH] mmc: host: iproc: Add ACPI support to IPROC SDHCI

From: Adrian Hunter
Date: Fri Jul 27 2018 - 07:17:27 EST

Next message: Takashi Iwai: "Re: [alsa-devel] [PATCH 0/4] usb-audio: Add UAC3 Power Domains"
Previous message: Minas Harutyunyan: "Re: [REPOST PATCH 4/4] usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms"
In reply to: Srinath Mannam: "Re: [PATCH] mmc: host: iproc: Add ACPI support to IPROC SDHCI"
Next in thread: Srinath Mannam: "Re: [PATCH] mmc: host: iproc: Add ACPI support to IPROC SDHCI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 27/07/18 11:59, Srinath Mannam wrote:
> Hi Adrian Hunter,
>
> Thank you very much for review and feedback.
> Please find my comments inline..
>
> On Fri, Jul 27, 2018 at 11:50 AM, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>> On 17/07/18 19:45, Srinath Mannam wrote:
>>> Add ACPI support to all IPROC SDHCI varients
>>>
>>> Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
>>> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
>>> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>>> Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@xxxxxxxxxxxx>
>>> ---
>>> drivers/mmc/host/Kconfig | 1 +
>>> drivers/mmc/host/sdhci-iproc.c | 187 ++++++++++++++++++++++++++++-------------
>>> 2 files changed, 128 insertions(+), 60 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index 0581c19..bc6702e 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -334,6 +334,7 @@ config MMC_SDHCI_IPROC
>>> tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
>>> depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
>>> depends on MMC_SDHCI_PLTFM
>>> + depends on OF || ACPI
>>> default ARCH_BCM_IPROC
>>> select MMC_SDHCI_IO_ACCESSORS
>>> help
>>> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
>>> index d0e83db..7c5c923 100644
>>> --- a/drivers/mmc/host/sdhci-iproc.c
>>> +++ b/drivers/mmc/host/sdhci-iproc.c
>>> @@ -15,6 +15,7 @@
>>> * iProc SDHCI platform driver
>>> */
>>>
>>> +#include <linux/acpi.h>
>>> #include <linux/delay.h>
>>> #include <linux/module.h>
>>> #include <linux/mmc/host.h>
>>> @@ -162,9 +163,19 @@ static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
>>> sdhci_iproc_writel(host, newval, reg & ~3);
>>> }
>>>
>>> +static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
>>> +{
>>> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +
>>> + if (pltfm_host->clk)
>>> + return sdhci_pltfm_clk_get_max_clock(host);
>>> + else
>>> + return pltfm_host->clock;
>>> +}
>>> +
>>> static const struct sdhci_ops sdhci_iproc_ops = {
>>> .set_clock = sdhci_set_clock,
>>> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>>> + .get_max_clock = sdhci_iproc_get_max_clock,
>>> .set_bus_width = sdhci_set_bus_width,
>>> .reset = sdhci_reset,
>>> .set_uhs_signaling = sdhci_set_uhs_signaling,
>>> @@ -178,34 +189,24 @@ static const struct sdhci_ops sdhci_iproc_32only_ops = {
>>> .write_w = sdhci_iproc_writew,
>>> .write_b = sdhci_iproc_writeb,
>>> .set_clock = sdhci_set_clock,
>>> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>>> + .get_max_clock = sdhci_iproc_get_max_clock,
>>> .set_bus_width = sdhci_set_bus_width,
>>> .reset = sdhci_reset,
>>> .set_uhs_signaling = sdhci_set_uhs_signaling,
>>> };
>>>
>>> +enum sdhci_pltfm_type {
>>> + SDHCI_PLTFM_IPROC_CYGNUS,
>>> + SDHCI_PLTFM_IPROC,
>>> + SDHCI_PLTFM_BCM2835,
>>> +};
>>> +
>>> static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
>>> .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
>>> .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON,
>>> .ops = &sdhci_iproc_32only_ops,
>>> };
>>>
>>> -static const struct sdhci_iproc_data iproc_cygnus_data = {
>>> - .pdata = &sdhci_iproc_cygnus_pltfm_data,
>>> - .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
>>> - & SDHCI_MAX_BLOCK_MASK) |
>>> - SDHCI_CAN_VDD_330 |
>>> - SDHCI_CAN_VDD_180 |
>>> - SDHCI_CAN_DO_SUSPEND |
>>> - SDHCI_CAN_DO_HISPD |
>>> - SDHCI_CAN_DO_ADMA2 |
>>> - SDHCI_CAN_DO_SDMA,
>>> - .caps1 = SDHCI_DRIVER_TYPE_C |
>>> - SDHCI_DRIVER_TYPE_D |
>>> - SDHCI_SUPPORT_DDR50,
>>> - .mmc_caps = MMC_CAP_1_8V_DDR,
>>> -};
>>> -
>>> static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
>>> .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
>>> SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
>>> @@ -213,21 +214,6 @@ static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
>>> .ops = &sdhci_iproc_ops,
>>> };
>>>
>>> -static const struct sdhci_iproc_data iproc_data = {
>>> - .pdata = &sdhci_iproc_pltfm_data,
>>> - .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
>>> - & SDHCI_MAX_BLOCK_MASK) |
>>> - SDHCI_CAN_VDD_330 |
>>> - SDHCI_CAN_VDD_180 |
>>> - SDHCI_CAN_DO_SUSPEND |
>>> - SDHCI_CAN_DO_HISPD |
>>> - SDHCI_CAN_DO_ADMA2 |
>>> - SDHCI_CAN_DO_SDMA,
>>> - .caps1 = SDHCI_DRIVER_TYPE_C |
>>> - SDHCI_DRIVER_TYPE_D |
>>> - SDHCI_SUPPORT_DDR50,
>>> -};
>>> -
>>> static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
>>> .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
>>> SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
>>> @@ -237,38 +223,104 @@ static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
>>> .ops = &sdhci_iproc_32only_ops,
>>> };
>>>
>>> -static const struct sdhci_iproc_data bcm2835_data = {
>>> - .pdata = &sdhci_bcm2835_pltfm_data,
>>> - .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
>>> - & SDHCI_MAX_BLOCK_MASK) |
>>> - SDHCI_CAN_VDD_330 |
>>> - SDHCI_CAN_DO_HISPD,
>>> - .caps1 = SDHCI_DRIVER_TYPE_A |
>>> - SDHCI_DRIVER_TYPE_C,
>>> - .mmc_caps = 0x00000000,
>>> +static const struct sdhci_iproc_data sdhci_iproc_data_list[] = {
>>
>> Why change to an array? Also would need to be a separate patch.
> In the existing device tree support, data parameter of of_device_id
> list contains pointers of "sdhci_iproc_data" structure.
> But driver_data parameter in acpi_device_id list is ulong. so we can't
> assign "sdhci_iproc_data" structure pointer which can be 64bit.

kernel_ulong_t is always the same size as a pointer.

> Hence, it is required to take array of "sdhci_iproc_data" structures,
> so that array index can assign to both data and driver_data
> parameters of of_device_id and acpi_device_id lists respectively. same
> pattern found in some other drivers.
> This method is required to use in the part of adding ACPI support. so
> I keep in single patch.
>
>>
>>> + [SDHCI_PLTFM_IPROC_CYGNUS] = {
>>> + /* SDHCI IPROC CYGNUS */
>>> + .pdata = &sdhci_iproc_cygnus_pltfm_data,
>>> + .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
>>> + & SDHCI_MAX_BLOCK_MASK) |
>>> + SDHCI_CAN_VDD_330 |
>>> + SDHCI_CAN_VDD_180 |
>>> + SDHCI_CAN_DO_SUSPEND |
>>> + SDHCI_CAN_DO_HISPD |
>>> + SDHCI_CAN_DO_ADMA2 |
>>> + SDHCI_CAN_DO_SDMA,
>>> + .caps1 = SDHCI_DRIVER_TYPE_C |
>>> + SDHCI_DRIVER_TYPE_D |
>>> + SDHCI_SUPPORT_DDR50,
>>> + .mmc_caps = MMC_CAP_1_8V_DDR,
>>> + },
>>> + [SDHCI_PLTFM_IPROC] = {
>>> + /* SDHCI IPROC */
>>> + .pdata = &sdhci_iproc_pltfm_data,
>>> + .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
>>> + & SDHCI_MAX_BLOCK_MASK) |
>>> + SDHCI_CAN_VDD_330 |
>>> + SDHCI_CAN_VDD_180 |
>>> + SDHCI_CAN_DO_SUSPEND |
>>> + SDHCI_CAN_DO_HISPD |
>>> + SDHCI_CAN_DO_ADMA2 |
>>> + SDHCI_CAN_DO_SDMA,
>>> + .caps1 = SDHCI_DRIVER_TYPE_C |
>>> + SDHCI_DRIVER_TYPE_D |
>>> + SDHCI_SUPPORT_DDR50,
>>> + },
>>> + [SDHCI_PLTFM_BCM2835] = {
>>> + /* SDHCI BCM2835 */
>>> + .pdata = &sdhci_bcm2835_pltfm_data,
>>> + .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
>>> + & SDHCI_MAX_BLOCK_MASK) |
>>> + SDHCI_CAN_VDD_330 |
>>> + SDHCI_CAN_DO_HISPD,
>>> + .caps1 = SDHCI_DRIVER_TYPE_A |
>>> + SDHCI_DRIVER_TYPE_C,
>>> + .mmc_caps = 0x00000000,
>>> +
>>> + },
>>> };
>>>
>>> static const struct of_device_id sdhci_iproc_of_match[] = {
>>> - { .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data },
>>> - { .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data},
>>> - { .compatible = "brcm,sdhci-iproc", .data = &iproc_data },
>>> + {
>>> + .compatible = "brcm,bcm2835-sdhci",
>>> + .data = (void *)SDHCI_PLTFM_BCM2835
>>> + },
>>> + {
>>> + .compatible = "brcm,sdhci-iproc-cygnus",
>>> + .data = (void *)SDHCI_PLTFM_IPROC_CYGNUS
>>> + },
>>> + {
>>> + .compatible = "brcm,sdhci-iproc",
>>> + .data = (void *)SDHCI_PLTFM_IPROC
>>> + },
>>> { }
>>> };
>>> MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
>>>
>>> +static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
>>> + { .id = "BRCM5871", .driver_data = SDHCI_PLTFM_IPROC_CYGNUS },
>>> + { .id = "BRCM5872", .driver_data = SDHCI_PLTFM_IPROC },
>>> + { /* sentinel */ }
>>> +};
>>> +MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
>>> +
>>> static int sdhci_iproc_probe(struct platform_device *pdev)
>>> {
>>> + struct device *dev = &pdev->dev;
>>> const struct of_device_id *match;
>>> + const struct acpi_device_id *acpi_id;
>>> const struct sdhci_iproc_data *iproc_data;
>>> struct sdhci_host *host;
>>> struct sdhci_iproc_host *iproc_host;
>>> struct sdhci_pltfm_host *pltfm_host;
>>> int ret;
>>> + enum sdhci_pltfm_type plat_type;
>>> +
>>> + if (dev->of_node) {
>>> + match = of_match_device(sdhci_iproc_of_match, dev);
>>> + if (match)
>>> + plat_type = (enum sdhci_pltfm_type)match->data;
>>> + else
>>> + return -ENODEV;
>>> + } else if (has_acpi_companion(dev)) {
>>> + acpi_id = acpi_match_device(sdhci_iproc_acpi_ids, dev);
>>> + if (acpi_id)
>>> + plat_type = (enum sdhci_pltfm_type)acpi_id->driver_data;
>>> + else
>>> + return -ENODEV;
>>> + } else
>>> + return -ENODEV;
>>>
>>> - match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
>>> - if (!match)
>>> - return -EINVAL;
>>> - iproc_data = match->data;
>>> + iproc_data = &sdhci_iproc_data_list[plat_type];
>>>
>>> host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
>>> if (IS_ERR(host))
>>> @@ -284,17 +336,30 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
>>>
>>> host->mmc->caps |= iproc_host->data->mmc_caps;
>>>
>>> - pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
>>> - if (IS_ERR(pltfm_host->clk)) {
>>> - ret = PTR_ERR(pltfm_host->clk);
>>> - goto err;
>>> - }
>>> - ret = clk_prepare_enable(pltfm_host->clk);
>>> - if (ret) {
>>> - dev_err(&pdev->dev, "failed to enable host clk\n");
>>> - goto err;
>>> + if (dev->of_node) {
>>> + pltfm_host->clk = devm_clk_get(dev, NULL);
>>> + if (IS_ERR(pltfm_host->clk)) {
>>> + ret = PTR_ERR(pltfm_host->clk);
>>> + goto err;
>>> + }
>>> + ret = clk_prepare_enable(pltfm_host->clk);
>>> + if (ret) {
>>> + dev_err(dev, "failed to enable host clk\n");
>>> + goto err;
>>> + }
>>> + } else if (has_acpi_companion(dev)) {
>>> + /*
>>> + * When Driver probe with ACPI device, clock devices
>>> + * are not available, so sdhci clock get from
>>> + * clock-frequency property given in _DSD object.
>>> + */
>>> + device_property_read_u32(dev, "clock-frequency",
>>> + &pltfm_host->clock);
>>
>> Is this a new property, or is it documented? Did you consider enhancing
>> __sdhci_read_caps() and using the existing "sdhci-caps" and
>> "sdhci-caps-mask" properties?
>>
> "clock-frequency" is not a new property also used in "sdhci-pltfm.c"
> to get clock
> frequency and use in the case of clock device node is not passed from
> device tree node.
> But In the case of ACPI support, ACPI does not support common clock framework.
> so clock frequency get by "clock-frequency" property given in _DSD
> object of ACPI device node.

So we should convert to generic device properties i.e. add the patch below and
call sdhci_get_property(pdev):

From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Date: Fri, 27 Jul 2018 13:52:02 +0300
Subject: [PATCH] mmc: sdhci-pltfm: Convert DT properties to generic device
properties

Convert DT properties to generic device properties so that drivers can get
properties from DT or ACPI.

Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/host/sdhci-pltfm.c | 68 +++++++++++++++++++++++++-----------------
drivers/mmc/host/sdhci-pltfm.h | 7 ++++-
2 files changed, 46 insertions(+), 29 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 02bea6159d79..b231c9a3f888 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -30,6 +30,7 @@

#include <linux/err.h>
#include <linux/module.h>
+#include <linux/property.h>
#include <linux/of.h>
#ifdef CONFIG_PPC
#include <asm/machdep.h>
@@ -51,11 +52,10 @@ unsigned int sdhci_pltfm_clk_get_max_clock(struct sdhci_host *host)
.set_uhs_signaling = sdhci_set_uhs_signaling,
};

-#ifdef CONFIG_OF
-static bool sdhci_of_wp_inverted(struct device_node *np)
+static bool sdhci_wp_inverted(struct device *dev)
{
- if (of_get_property(np, "sdhci,wp-inverted", NULL) ||
- of_get_property(np, "wp-inverted", NULL))
+ if (device_property_present(dev, "sdhci,wp-inverted") ||
+ device_property_present(dev, "wp-inverted"))
return true;

/* Old device trees don't have the wp-inverted property. */
@@ -66,52 +66,64 @@ static bool sdhci_of_wp_inverted(struct device_node *np)
#endif /* CONFIG_PPC */
}

-void sdhci_get_of_property(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static void sdhci_get_compatibility(struct platform_device *pdev)
{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node;
+
+ if (!np)
+ return;
+
+ if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+ of_device_is_compatible(np, "fsl,t4240-esdhc") ||
+ of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+}
+#else
+void sdhci_get_compatibility(struct platform_device *pdev) {}
+#endif /* CONFIG_OF */
+
+void sdhci_get_property(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
u32 bus_width;

- if (of_get_property(np, "sdhci,auto-cmd12", NULL))
+ if (device_property_present(dev, "sdhci,auto-cmd12"))
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;

- if (of_get_property(np, "sdhci,1-bit-only", NULL) ||
- (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+ if (device_property_present(dev, "sdhci,1-bit-only") ||
+ (device_property_read_u32(dev, "bus-width", &bus_width) == 0 &&
bus_width == 1))
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;

- if (sdhci_of_wp_inverted(np))
+ if (sdhci_wp_inverted(dev))
host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;

- if (of_get_property(np, "broken-cd", NULL))
+ if (device_property_present(dev, "broken-cd"))
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;

- if (of_get_property(np, "no-1-8-v", NULL))
+ if (device_property_present(dev, "no-1-8-v"))
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;

- if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
- host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
-
- if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
- of_device_is_compatible(np, "fsl,p1010-esdhc") ||
- of_device_is_compatible(np, "fsl,t4240-esdhc") ||
- of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
- host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ sdhci_get_compatibility(pdev);

- of_property_read_u32(np, "clock-frequency", &pltfm_host->clock);
+ device_property_read_u32(dev, "clock-frequency", &pltfm_host->clock);

- if (of_find_property(np, "keep-power-in-suspend", NULL))
+ if (device_property_present(dev, "keep-power-in-suspend"))
host->mmc->pm_caps |= MMC_PM_KEEP_POWER;

- if (of_property_read_bool(np, "wakeup-source") ||
- of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
+ if (device_property_read_bool(dev, "wakeup-source") ||
+ device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
}
-#else
-void sdhci_get_of_property(struct platform_device *pdev) {}
-#endif /* CONFIG_OF */
-EXPORT_SYMBOL_GPL(sdhci_get_of_property);
+EXPORT_SYMBOL_GPL(sdhci_get_property);

struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
const struct sdhci_pltfm_data *pdata,
@@ -184,7 +196,7 @@ int sdhci_pltfm_register(struct platform_device *pdev,
if (IS_ERR(host))
return PTR_ERR(host);

- sdhci_get_of_property(pdev);
+ sdhci_get_property(pdev);

ret = sdhci_add_host(host);
if (ret)
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index 1e91fb1c020e..6109987fc3b5 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -90,7 +90,12 @@ static inline void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg)
}
#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */

-extern void sdhci_get_of_property(struct platform_device *pdev);
+void sdhci_get_property(struct platform_device *pdev);
+
+static inline void sdhci_get_of_property(struct platform_device *pdev)
+{
+ return sdhci_get_property(pdev);
+}

extern struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
const struct sdhci_pltfm_data *pdata,
--
1.9.1

>
>>> + if (!pltfm_host->clock) {
>>> + ret = -ENODEV;
>>> + goto err;
>>> + }
>>> }
>>> -
>>> if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
>>> host->caps = iproc_host->data->caps;
>>> host->caps1 = iproc_host->data->caps1;
>>> @@ -307,7 +372,8 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
>>> return 0;
>>>
>>> err_clk:
>>> - clk_disable_unprepare(pltfm_host->clk);
>>> + if (dev->of_node)
>>> + clk_disable_unprepare(pltfm_host->clk);
>>> err:
>>> sdhci_pltfm_free(pdev);
>>> return ret;
>>> @@ -317,6 +383,7 @@ static struct platform_driver sdhci_iproc_driver = {
>>> .driver = {
>>> .name = "sdhci-iproc",
>>> .of_match_table = sdhci_iproc_of_match,
>>> + .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
>>> .pm = &sdhci_pltfm_pmops,
>>> },
>>> .probe = sdhci_iproc_probe,
>>>
>>
> Regards,
> Srinath.
>

Next message: Takashi Iwai: "Re: [alsa-devel] [PATCH 0/4] usb-audio: Add UAC3 Power Domains"
Previous message: Minas Harutyunyan: "Re: [REPOST PATCH 4/4] usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms"
In reply to: Srinath Mannam: "Re: [PATCH] mmc: host: iproc: Add ACPI support to IPROC SDHCI"
Next in thread: Srinath Mannam: "Re: [PATCH] mmc: host: iproc: Add ACPI support to IPROC SDHCI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]