RE: [PATCH 4.19 025/361] ACPICA: AML interpreter: add region addresses in global list during initialization
From: Schmauss, Erik
Date: Mon Nov 12 2018 - 15:13:01 EST
> -----Original Message-----
> From: Holger HoffstÃtte [mailto:holger@xxxxxxxxxxxxxxxxxxxxxx]
> Sent: Monday, November 12, 2018 11:42 AM
> To: Schmauss, Erik <erik.schmauss@xxxxxxxxx>; Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx
> Cc: stable@xxxxxxxxxxxxxxx; Jean-Marc Lenoir <archlinux@xxxxxxxxxxx>;
> Wysocki, Rafael J <rafael.j.wysocki@xxxxxxxxx>
> Subject: Re: [PATCH 4.19 025/361] ACPICA: AML interpreter: add region
> addresses in global list during initialization
>
> Hello Erik,
>
> thanks for responding.
>
> On 11/12/18 8:01 PM, Schmauss, Erik wrote:
> >> As probably expected this patch causes problems. In my case one
> >> server can no longer load the nct6775 hwmon module, which means the
> >> fan cannot be monitored, and therefore my monitoring system promptly
> >> starts spamming me with alerts that my fan has failed - which is of course
> not true.
> >>
> >> --snip--
> >> Nov 12 18:08:56 tux kernel: nct6775: Found NCT6776D/F or compatible
> >> chip at
> >> 0x2e:0x290 Nov 12 18:08:56 tux kernel: ACPI Warning: SystemIO range
> >> 0x0000000000000295-0x0000000000000296 conflicts with OpRegion
> >> 0x0000000000000290-0x Nov 12 18:08:56 tux kernel: ACPI: If an ACPI
> >> driver is available for this device, you should use it instead of the
> >> native driver
> >> --snip--
> >>
> >> This is certainly caused by my old BIOS and its broken ACPI
> >> implementation, however since it's working perfectly fine otherwise I
> >> see no reason to replace it. That being said, I must be able to
> >> monitor my fan, so for now reverting the patch immediately "fixed"
> >> the problem for me - the fan entries appeared in sysfs again after
> successfully loading the module.
> >>
> >> Idea, workarounds or patches welcome.
> >
> > Is there a firmware update available for this machine? If so, you may
> > want to do a firmware update.
>
> The motherboard is from 2011 and I already installed the last available BIOS
> from 2013 a few years ago. That fixed exactly nothing. :) This was my last
> motherboard from Asus ever, but alas, it's still here and otherwise working,
> so..
>
> > Also, what is the behavior in kernels 4.16 or older?
>
Hi,
> Everything just worked - yes, with ACPI spew, but.. Â\(ã)/Â
> I understand that the patch might well be "technically correct" and OK for
> mainline/current hardware and will try playing with acpi=.. kernel flags.
It's strange how the driver would load in 4.16 and fail to load with this patch.
I would like to make sure that the driver load behavior is not being changed
from 4.16 or earlier.
Could you send a working dmesg from 4.16 (or earlier) and a failing dmesg with
this stable branch using the same kernel command line parameters for both?
I don't need too much of the spew if it looks the same. I'm more interested in
the initializations and the warning message.
Erik
>
> thanks,
> Holger